![background image](http://html.mh-extra.com/html/panasonic/aw-he870n/aw-he870n_operating-instructions-manual_277291022.webp)
- 22 -
Example of mounting the camera onto a bracket
or tripod made by another manufacturer
Mounting spacer (supplied)
Camera mounting screw holes
Mounting screw (M4)
Drop-prevention wire
Mounting screws
(Inch screws: 1/4-20UNC)
Bracket or tripod made by
another manufacturer
Flat washers
Spring washers
Hitch the end of the wire
onto the anchor bolt by
tightening the nut or screw
or by using a hook.
Notes
Ensure that the installation location is strong enough to bear at
least five times the total weight.
Even when the camera has been mounted on a tripod, be
absolutely sure to take steps to prevent the camera from falling.
Tighten the mounting screws and mounting spacers using the
torque levels shown in the table to the right, and then check for
play and unsteadiness.
Screws/Spacer
Clamping torque
Mounting screws (M4)
1.5N • m (15 kgf • cm)
Mounting screws (Inch screws)
2.0N • m (20 kgf • cm)
Mounting spacer
2.0N • m (20 kgf • cm)
Example of mounting on a surface above the
camera
Mounting spacer (supplied)
Mounting screw (M4)
Drop-prevention wire
Mounting screws
(Inch screws: 1/4-20UNC)
Camera mounting bracket
Adjust the camera
mounting bracket on the
surface above the camera
so that the ventilation
holes of the cooling fan
will not be blocked.
Flat washers
Spring washers
Hitch the end of the wire
onto the anchor bolt by
tightening the nut or screw
or by using a hook.
Mounting
The connection and installation should be done by qualified service personnel
or system installers. Refer any servicing to qualified service personnel.