Home
/
Panasonic
/
AW-HE20KP
/
Operating Instruction

Panasonic AW-HE20KP, Operating Instruction, Page: 109 / 126

Share

Page: 109 / 126

Panasonic AW-HE20KP Operating Instruction Download Page 109

109

Default Reset

The unit’s setting data is initialized and the unit is restarted in here.

Reset to the default (Except the network settings)

When the [Execute] button is clicked, the unit’s settings are returned to their defaults.
When the initialization operation is started, the unit is restarted so no operations can be undertaken for about 2
minutes.

[Note]
The following setting items will not be returned to defaults.

-  [Priority Mode]
-  [Frequency]
-  [Format]
-  All settings under [User mng.]
-  All settings under [Network - Network]
-  [AWB] adjustment values will not be returned to defaults.

Reboot

When the [Execute] button is clicked, the unit is rebooted.
After the unit has been rebooted, no operations can be undertaken for about 2 minutes as is the case when the unit’s
power is turned on.

«
...
107
108
109
110
111
...
»

Summary of Contents for AW-HE20KP































































































































Reviews:

No comments