background image

Technical Terminology & Cautions for Use

AECTB36E   201811-T

Usage, storage, and transport conditions (except

turquoise switches)

During usage, storage, or transportation, avoid locations subject
to direct sunlight and maintain normal temperature, humidity,
and pressure conditions.
The allowable specifications for environments suitable for usage,
storage, and transportation are given below.
1) Temperature: The allowable temperature range differs for
each switch, so refer to the switch’s individual specifications. In
addition, when transporting or storing switches while they are
tube packaged, there are cases when the temperature may differ
from the allowable range. In this situation, be sure to consult the
individual specifications.
2) Humidity: The allowable temperature range differs for each
switch, so refer to the switch’s individual specifications.
3) Pressure: 86 to 106 kPa
The humidity range varies with the temperature. Use within the
range indicated in the graph below.

(The allowable temperature depends on the switch.)
• Condensation will occur inside the switch if there is a sudden
change in ambient temperature when used in an atmosphere of
high temperature and high humidity. This is particularly likely to
happen when being transported by ship, so please be careful of
the atmosphere when shipping. Condensation is the
phenomenon whereby steam condenses to cause water
droplets that adhere to the switch when an atmosphere of high
temperature and humidity rapidly changes from a high to low
temperature or when the switch is quickly moved from a low
humidity location to one of high temperature and humidity. 
Please be careful because condensation can cause adverse
conditions such as deterioration of insulation, coil cutoff, and
rust.
• Condensation or other moisture may freeze on the switch when
the temperatures is lower than 0°C 

32°F

. This causes problems

such as sticking of movable parts or operational time lags.
• The plastic becomes brittle if the switch is exposed to a low
temperature, low humidity environment for long periods of time.
• Storage for extended periods of time (including transportation
periods) at high temperatures or high humidity levels or in
atmospheres with organic gases or sulfide gases may cause a
sulfide film or oxide film to form on the surfaces of the contacts
and/or it may interfere with the functions. Check out the
atmosphere in which the units are to be stored and transported.
• In terms of the packing format used, make every effort to keep
the effects of moisture, organic gases and sulfide gases to the
absolute minimum.

 We reserve the right to modify without notice the

materials, internal components, and other parts to improve
product quality.

Handling precautions

When handling the switches, be careful not to drop them on the
floor since this may damage them.

* Select contact sulfurization (clipping) prevention products (FS and Au-clad double 

layer contacts) for use with extremely small loads or an environment-resistant 
Turquoise switch.

Others

1) Failure modes of switches include short-circuiting, open-
circuiting and temperature rises. If this switch is to be used in
equipment where safety is a prime consideration, examine the
possible effects of these failures on the equipment concerned,
and ensure safety by providing protection circuits or protection
devices. In terms of the systems involved, make provision for
redundancy in the design and take steps to achieve safety
design.
2) The ambient operating temperature (and humidity) range
quoted is the range in which the switch can be operated on a 
continuous basis: it does not mean that using the switch within 
the rating guarantees the durability performance and 
environment withstanding performance of the switch. For details 
on the performance guarantee, check the specifications of each 
product concerned.

Tolerance range

(Avoid
condensation when
used at temperatures
higher than 0

°

C

32

°

F

)

(Avoid freezing when
used at temperatures
lower than 0

°

C

32

°

F

)

85

5

–40

–40

0

+32

+85

+185

Temperature, 

°

C

°

F

Humidity, %R.H.

ー 10 ー

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Summary of Contents for AV6 Series













Reviews: