Live Switcher
Software Control Panel
©
Panasonic Corporation 2022
- 3 -
1. About Software Control Panel
Introduction
Software Control Panel is application software for AV-UHS500 that runs in Windows and Macintosh.
This software is used to control AV-UHS500 to perform operations such as switching the video material
for the PGM, PVW and other video buses while checking the material, turning keys on and off,
controlling the playback of still images and clips, and viewing a list of all materials.
The main features of this software are as follows.
[Background transition and wipe operation]
ME selection
Select the ME to be operated.
Bus and material selection
Select the PVW, and PGM and KEY1, KEY2, and KEY3 buses and display and select the material
of each of the buses. Either a video or still image is displayed for material display depending on the
material.
Transition operation
Select from BKGD, and KEY1 as the transition target and then perform the transition operation.
Transition type setting
Set a transition type from MIX, and WIPE.
Wipe direction selection
Select the direction for the wipe when a background transition is executed.
You can select from R (reverse), and N/R (normal reverse).
Transition execution
A transition is executed using any of the fader operation, AUTO (auto transition), and CUT
(instant transition).
Transition pattern selection
As the transition pattern, select one of the 16 (4K) / 51 (2K) patterns displayed in the multiple
pages that can be switched by the FWD/BACK buttons.
[KEY/DSK operation]
Execute/cancel transitions for KEY1.
Display the setting information of the material set for each key.
Material thumbnails
Transition type and transition time
