Panasonic AV-HS60C3G, Operating Manual

Page: 151 / 176

– 151 –
Chapter 10 Specifications — Specifications
Control Panel AV-HS60C4
Power supply
AC 100 V to 240 V, 50 Hz/60 Hz
Power consumption
40 W
Supports redundant power supply.
indicates safety information.
Control terminal
<MAIN FRAME> terminal Compatible with 100Base-TX and AUTO-MDIX
f
Connection cable: LAN cable (CAT5E), straight cable, STP (Shielded Twisted Pair), 10 m (32.8 ft)
f
Connector: RJ-45
* When connected to the <LAN> terminal, no video will be displayed on the Menu Panel AV-HS60C3.
<MENU PANEL> terminal Used only for the Menu Panel AV-HS60C3
f
Connector: DVI-D
f
Because an independent signal format is used, cannot be displayed on a DVI-D monitor.
f
Cannot be used concurrently with a DVI-D monitor (computer) connected to the <DVI-D> terminal. Select with the
display selector switch.
<DVI-D> terminal Used for displaying menus to the DVI monitor (computer)
f
Connector: DVI-D
f
Monitor resolution: 1366 × 768 compatible monitor
f
Cannot be used concurrently with the <MENU PANEL> terminal. Select with the display selector switch.
This terminal cannot be used with the Live Production Suite series. Do not connect anything to this terminal.
<USB> terminal For DVI monitor (computer) menu operation
f
Connector: USB (Type A, female)
f
Cannot be used for the Menu Panel AV-HS60C3.
This terminal cannot be used with the Live Production Suite series. Do not connect anything to this terminal.
Display selector switch Switch for selecting <MENU PANEL> terminal or <DVI-D> terminal
This switch cannot be used with the Live Production Suite series. Fix this to the <MENU PANEL> side for use.
<COM1 (M)> terminal RS-422 control terminal
For master connection for controlling external devices
f
Connector: D-sub 9-pin (female), inch screw
This terminal cannot be used with the Live Production Suite series. Do not connect anything to this terminal.
<COM2 (RS-232)> terminal RS-232 control terminal
For external device control connections
f
Connector: D-sub 9-pin (male), inch screw
This terminal cannot be used with the Live Production Suite series. Do not connect anything to this terminal.
<GPI I/O> terminal GPI IN: 8 inputs, general-purpose, photocoupler sensing
ALARM OUT: 1 output, open collector output (negative logic)
GPI OUT: 10 outputs, selected from general purpose, tally
Open collector output
f
Connector: D-sub 25-pin (female), inch screw
f
Logic is switchable by menu.
This terminal cannot be used with the Live Production Suite series. Do not connect anything to this terminal.
ME number 2ME
Other
Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 10% to 90% (no condensation)
Dimensions (W × H × D) 656 mm × 160 mm × 400 mm (25-27/32 inches × 6-5/16 inches × 15-3/4 inches) (excluding protrusions)
Mass Approx. 15.0 k
]
(33.1 lbs.) (excluding accessories)
r
For AV-HS60C4E
Inrush current, measured according to European standard EN55103-1, on initial switch-on: 3 A, after a supply interruption of 5 s: 25 A (Each mains
input)