Panasonic AV-HS60C3G, Operating Manual

Page: 130 / 176

– 130 –
Chapter 8 System Menu — Setting the external connection
Setting the external connection
Setting a tally
Setting a tally group
1
Select the <SYS> button → [PERIPHERAL] → [Tally] tab.
2
Select an item in [Target A], [
+
Target B], [
+
Target C], [
+
Target D], [
+
Target E], [
+
Target F], [
+
Target G], and [
+
Target H] of the [Tally
Group1 (On-Air)] column.
f
Set the reference output for [Tally Group1 (On-Air)] (on-air tally).
Off, ME1PGM, ME2PGM, DSKPGM1, DSKEXT1-1, DSKEXT1-2, DSKPGM2, DSKEXT2-1, DSKEXT2-2, AUX1 to AUX16
f
Since [Tally Group1 (On-Air)] is used exclusively for on-air tally, a preview output cannot be specified.
f
Tally information of sources that configure any of the outputs set in [Target A], [ + Target B], [ + Target C], [ + Target D], [ + Target E], [ + Target F], [ + Target
G], and [ + Target H] of the [Tally Group1 (On-Air)] column is generated.
3
Select an item in [Target A], [
+
Target B], [
+
Target C], [
+
Target D], [
+
Target E], [
+
Target F], [
+
Target G], and [
+
Target H] of columns
[Tally Group2] to [Tally Group4].
f
Set the reference output for [Tally Group2] to [Tally Group4].
Off, ME1PGM, ME1PVW, ME2PGM, ME2PVW, DSKPGM1, DSKPVW1, DSKEXT1-1, DSKEXT1-2, DSKPGM2, DSKPVW2, DSKEXT2-1,
DSKEXT2-2, AUX1 to AUX16
4
Select an item in [Color] in the [Tally Group1 (On-Air)]/[Tally Group2] to [Tally Group4] columns.
f
Select [Red], [Green], [Yellow], or [Orange] for the color to be used for the tally in the MultiView display.
f
Since [Tally Group1 (On-Air)] is exclusively for on-air tally, the color is fixed to [Red].
Tally display of the MultiView display
The MultiView display has 3 tally display targets: [Tally Box], [Tally Label L], and [Tally Label R].
For each of those areas, [Tally Group1] to [Tally Group4] are set and displayed.
f
For details on the tally display of the MultiView display, refer to “Setting the tally display”.
High tally display and bus tally display of the button
The High tally and bus tally are displayed for the next button from [Tally Group1 (On-Air)] (on-air tally).
f
Applicable buttons are the AUX bus crosspoint buttons, KEY bus crosspoint buttons, PGM/A bus crosspoint buttons, PST/B bus crosspoint buttons,
corresponding buttons from <KEY1 TRNS>, <KEY2 TRNS>, <KEY3 TRNS>, <KEY4 TRNS> and buttons from <DSK1 TRNS>, <DSK2 TRNS>.