Live Switcher IP Interface Specifications
©
Panasonic Corporation 2013 All Rights Reserved.
- 13 -
3.5. Bus crosspoint query
This command queries the crosspoints which have been taken by the buses.
Command
name
Category
Command
Parameter
value
Setting
Remarks
Bus
crosspoint
query
Request
QBST
[:Parameter 1]
[:Parameter 1]
:00
:01
:02
:03
:04
:05
:06
:07
:08
:09
:10
:11
:12
:13
:14
:15
Select the bus command
Bus A (top side regardless of mode)
Bus B (bottom side regardless of mode)
PGM (PGM column regardless of mode)
PVW (PVW column regardless of mode)
KEY-Fill
KEY-Source
DSK-Fill
DSK-Source
---
---
PinP1
PinP2
AUX1
AUX2
AUX3
AUX4
This command,
which is the
crosspoint query
command, is
returned by ABST.
To ascertain the
status of
materials, use the
QBSC command
instead.
Response
ABST
[:Parameter 1]
[:Parameter 2]
[:Parameter 3]
[:Parameter 1]
:00
:01
:02
:03
:04
:05
:06
:07
:08
:09
:10
:11
:12
:13
:14
:15
[:Parameter 2]
:00 to 23
:99
[:Parameter 3]
:0
:1
Select the bus command
Bus A (top side regardless of mode)
Bus B (bottom side regardless of mode)
PGM (PGM column regardless of mode)
PVW (PVW column regardless of mode)
KEY-Fill
KEY-Source
DSK-Fill
DSK-Source
---
---
PinP1
PinP2
AUX1
AUX2
AUX3
AUX4
Crosspoint
XPT1 to XPT24
No selection
Tally information
Tally Off
Tally On
This command is
returned in
response to the
QBST command.
