Panasonic AV-HS04M8, Operating Instructions Manual

Page: 9 / 88

8 (E)
ENGLISH
Mounting
Install this board in the mainframe of the AV-HS450N or AV-HS450E multi-format
live switcher (hereafter referred as the “AV-HS450”).
<Notes>

Be sure to ask the store or dealer where you purchased the product for assistance
with mounting and removal.

Set to OFF and unplug the power connector before mounting and removal.

Before making any physical contact with the board, touch your hand to metal that has
been grounded to discharge static electricity from your body.
An anti-static wrist strap is recommended for safety. Failures may be caused if you
touch this board while you are still charged with static electricity.

Avoid damage to this board by not dropping it or subjecting it to strong shocks or
vibrations.

Be sure to mount the blank panel installed, after removing this board.

When installing or removing this board, take care not to hurt yourself on the edges
and metal parts of the boards.

Turn off the power of the AV-HS450, and unplug the power cord.

Loosen the two screws of SLOT A or SLOT B on the input side at the rear of the
AV-HS450, and remove the blank panel.
Screw
Blank panel
Screw
SLOT A
SLOT B