background image

14

15

Specifications

[General]

Power supply: 

DC 12 V (supplied by the camera)

Power consumption: 

10 W

 indicates safety information.

Ambient operating temperature:

 

 0 °C to 45 °C (32 °F to 113 °F)

Storage temperature:

 

–20 °C to 60 °C (–4 °F to 140 °F)

Ambient operating humidity:

 

10% to 85% (no condensation)

Dimensions (Width 

 Height 

 Depth):

 

 243.5 mm 

 212 mm 

 172 mm

(9-19/32 inches 

 8-11/32 inches 

 6-25/32 inches)

(with hood attached)

 

 243.5 mm 

 212 mm 

 85 mm

(9-19/32 inches 

 8-11/32 inches 

 3-11/32 inches)

(without hood)

Weight: 

Approx. 1.6 k

g

 (3.53 lb) (without hood)

[Display panel]

Panel size:

 

7.0-inch (177.8 mm)

Number of pixels:

 

1024 

 600 (WSVGA)

Display colors:

 

Approx. 16,200,000 colors

[Switch functions and connectors]

Operation panel:

 

 

POWER switch 

 1

MENU button 

p

1

SELECT dial 

p

1

Function buttons 

 3

Picture adjusting knobs 

 3

([BRIGHT], [CONTRAST], [PEAKING])

Connectors:

 

 Camera I/F connector (D-Sub 29-pin 

 1)

Maintenance inspections

Maintenance inspections through periodic and appropriate maintenance are essential to keep the unit in optimum condition and ensure safe operation. 

Be sure to conduct maintenance inspections to enable long-term, full use of all its functions.

Necessity of periodic maintenance service

The LCD panel is equipped with a backlight. Performance of the backlight (a consumable component) deteriorates over time, and will eventually fail.

Therefore, service should not be left until failure occurs, but scheduled maintenance should be conducted to maintain device performance and prevent 

unexpected consumable-related failures.

Summary of Contents for AK-HVF70G

















Reviews: