Panasonic AK-HRP1005G, Operation Manual

Page: 26 / 37

14 DETAIL
ヒチバチピ
ュユヵモリロ
パ ヒブ
パ パ パ
ュヵロ
ョンユヲハ
ラハュヵロ
ロユヷユロ
ヷハュヵロ
ロユヷユロ
ヤヰンリワヨ
ビチバチピ
ュユヵモリロ
パ ビ
パ パ
ロユヷユロ
ュユヱユワュハ
ヨモリワドヌナ
ヨモリワドノナ
レワユユ
モヱユチロヷ
ピチバチピ
ュユヵモリロ
ュヵロ
ヴヸ
ヰワ
Item Setting details
DTL Sets the level of the overall detail effect (master detail).
This is enabled when [DTL SW] is “ON”.
CORING Sets the level of signal (including noise) that does not activate the detail effect.
This is enabled when [DTL SW] is “ON”.
H.DTL LEVEL Sets the intensity of the detail level in the horizontal direction.
This is enabled when [DTL SW] is “ON”.
V.DTL LEVEL Sets the intensity of the detail level in the vertical direction.
This is enabled when [DTL SW] is “ON”.
FREQ. Sets the thickness (boost frequency) of the detail.
This is enabled when [DTL SW] is “ON”.
LEVEL DEPEND. Compresses the detail of dark areas when detail of the brightness signal is emphasized. The larger the set-
ting value the more that detail of bright areas is compressed.
This is enabled when [DTL SW] is “ON”.
KNEE APE LV Sets the detail level of high-brightness areas (extremely bright areas).
This is enabled when [DTL SW] is “ON”.
GAIN(+) Sets the detail level of the plus direction (to make brighter).
This is enabled when [DTL SW] is “ON”.
GAIN(-) Sets the detail level of the minus direction (to make darker).
This is enabled when [DTL SW] is “ON”.
DTL SW Sets the detail function (video contour adjustment) to ON/OFF.
- 26 -
ROP Menu (during AJ-CX4000 Connection)