manualshive.com logo in svg

Panasonic AK-HCU250E, Operating Manual, Page: 21 / 66

Share
Download
Panasonic AK-HCU250E Operating Manual Download Page 21

Parts and their functions

- 

21

 -

Rear panel 2

5

7

1

2

3

6

8

4

1 [LAN] connector

It is the LAN connector (RJ45) for connecting the ROP (AK-HRP250 / AK-HRP1000 / AK-

HRP1005) with an IP connection.

Use a switch hub and connect the devices with a 10BASE-T/100BASE-TX straight cable. This 

connector is for connecting a personal computer when configuring Web settings.

 

● Connect with a category 5e or better STP (Shielded Twisted Pair) LAN cable.

2 [COMMUNICATION] connector

This connector is for connecting the intercom signals and tally signals to the external system.

3 [ROP] connector

This connector is for connecting a ROP (sold separately).

4 [MIC1] and [MIC2] connectors

These connectors are for outputting the analog signals of microphones 1 and 2 of the camera.

The microphone level is 0 dBm/600 Ω.

5 [CAMERA] connector

This connector is for connecting the optical fiber multi cable (sold separately).

6 Cooling fan

This is the unit's cooling fan.

7 AC power socket

This socket is for inputting AC power.

Connect the supplied power cable, and use a 3-prong outlet and ground the unit properly.

8 [SIGNAL GND] terminal

Connect this to the system ground.

Summary of Contents for AK-HCU250E



































































Reviews:

No comments