High-Definition, Long-Distance,
Optical Digital Transmission
By connecting the CCU and the
AK-HC3800 Studio Handy Camera by
optical fiber cable, uncompressed digital
signals can be transmitted with high quality.
The cable between the camera and the
CCU can be extended up to approximately
1,200 m (1,312 yards).*
1
*1: When power is supplied from the CCU.
HD Multi-Format Supported
The AK-HCU200 is 59.94 Hz/50 Hz
switchable, and supports 1080/59.94i,
1080/50i, 1080/29.97PsF,*
2
1080/25PsF,*
2
1080/23.98PsF,*
2
720/59.94p, and 720/50p
HD formats.
*2: The 1080/29.97PsF, 1080/25PsF and 1080/23.98PsF
formats must be selected at the camera.
Prompter Supported
Two SDI channels and one VBS channel are
provided for RET input, and prompter input
(analog video signal input) is included as
standard. Prompt signals input to the CCU
can be output from the prompter terminal
on the camera side.
HD/SD Simultaneous Operation
Two SDI OUT and two SDI OUT (PM) lines
are provided. In addition to HD video signal
output, SD downconverted video signal
output (SDI, analog composite) comes as
standard. SD monitoring is also possible.
IP Connection Camera Remote
Multiple AK-HRP200G Remote Operation
Panels and up to 19 AK-HCU200 Camera
Control Units can be routed through a hub
with IP connection. Camera control units on
a LAN can be freely controlled by the
remote operation panels for highly versatile
operation.
Compatibility with ROP/MSU
The AK-HRP935 Remote Operation Panel or
AK-MSU935 Master Setup Unit can also be
used for serial remote control of the
AK-HCU200 camera control unit.*
3
*3: Only functions that are supported by the CCU can be
controlled by the AK-MSU935 or AK-HRP935.
2U Rack Mounting Size
The 2U height of this compact, lightweight
unit allows 2U rack mounting.
Setting Up CCU with a PC
When connecting a CCU and PC by IP
connection, the CCU set-up menu can be
displayed and changed on the PC's web
browser.
Bar ID Display Output
Text can be superimposed onto the color
bar output signal. Displaying the video
source and other information in this way is
convenient during system set-up and
standby.
SD Memory Cards Supported
The SD memory card slot allows CCU
setting data to be saved on an SD memory
card. Firmware updates can also be
handled by SD memory card.
Allows a High-Quality, Uncompressed, Long-Distance Optical Fiber Transmission
Camera System to Be Configured at Low Cost
AK-HCU200
Camera Control Unit (CCU)
AK-HCU200P/HCU200E (Tajimi connector model)
AK-HCU200PS/HCU200ES (LEMO connector model)
AK-HRP200G
Remote Operation Panel
ROP Cable (Option)
AK-HVF70G
17.8cm (7 inches) LCD Color Viewfinder
AJ-MC700P
Microphone
AJ-HVF21KG
AJ-CVF100G
EVF
Optical fiber multi cable
Max. 1,200 m / 1,312 yards
AK-HC3800
Studio Handy Camera
RETURN IN
PC
Picture monitor
(Analog SD)
Wave monitor
Picture monitor
(HD/SD SDI)
HD/SD SDI OUT
G/L
PROMPTER IN
ETHER NET
ETHER NET (Cross)
*
2
*
2
*
1
*1: Panasonic recommends the use of CAC-compatible lenses recommended by each manufacturer.
*2 AK-HRP200G require external power supply.
SHAN-TM700
Tripod Adapter
AK-HCU200
Camera Control Unit
Max. 50 m / 164 feet
HUB
Lens operation
system accessories
Pedestal System
SD memory card
SD memory card
Master Setup Unit (MSU)
SD memory card
Income
Headphone
DC IN
2/3-type HD Lens
Income
Headphone
DC OUT
DC12 V (max. 1 A)
PROMPTER OUT
MSU
System Configuration and Interface
AK-HCU200 front panel and rear panel
3
