AK-HC3500A Studio Handy Camera
Power Supply:
DC 12 V (during external power supply operation)
AC 220 V (when CCU is connected)
Power Consumption:
AK-HC3500AP:
32W (during external power supply operation)
34W (when CCU is coneected)
AK-HC3500AE/AK-HC3500AES:
28W (during external power supply operation)
70W (when CCU is coneected)
Operating Temperature: –10 °C to 45 °C (14°F to 113°F)
Preheating required at temperatures below 0°C (32°F)
Operating Humidity:
Less than 85 %
Storage Temperature:
–20 °C to 60 °C (–4°F to 140°F)
Weight:
Approx. 4.7 kg (approx. 10.36 lb)
Dimensions (W x H x D): 135 mm x 260 mm x 360 mm
(5-5/16 inches x 10-1/4inches x 14-3/16 inches)
excluding protrusions
Pickup Device:
2/3 type 2.2 million pixel IT, CCD x 3
System:
GBR Pickup System
Color Separation Optical system:
f/1.4 prism
CC Filter:
3200 K, 4300 K, 6300 K, Cross, Diffusion
ND Filter:
CAP, Through, 1/4, 1/16, 1/64
Lens mount:
Bayonet mount
Sensitivity:
59.94 Hz: F10 (2000 lx, 3200 K, 89.9 %)
50 Hz:
F11 (2000 lx, 3200 K, 89.9 %)
S/N:
60 dB (typ) (Y: 30 MHz)
Horizontal modulation: More than 50 % (27.5 MHz)
Output Format:
1080/59.94i, 1080/50i, 1080/29.97p (over 59.94i),
1080/25p (over 50i), 1080/23.98p (over 59.94i)
HD SDI Output:
HD signal = 0.8 V [p-p], 75 Ω (BNC)
The HD SDI 2 signal output can be added to the
regular images using the camera menu item setting
and switched to the VF or RET image output.
Embedded audio supported
(MUTE when RET Video output)
PROMPT Output:
VBS signal = 1 V [p-p], 75 Ω (BNC)
GENLOCK Input:
Tri-level SYNC/BB (BNC×1)
The PROMPT output and the GENLOCK input are
changed with the switch.
AUX Output:
Prompt2 Output: VBS Signal = 1 V [p-p], 75 Ω (BNC)
(When there is Prompt2 input in CCU)
MIC Input:
–60 dBu to 4 dBu (XLR 3-pin female x 2)
Gain selected by camera menu
Intercom:
Input: –60 dBu to –10 dBu
Output: 100 mW max. (XLR 5-pin, female x 2)
(The mix of PGM1 and PGM2 is individually controlled)
DC OUT:
12 V, MAX. 1 A
AK-MSU935A Master Setup Unit
Power Supply:
DC 12 V
Power Consumption:
15 W
Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F )
Operating Humidity:
Less than 80 %
Dimensions (WxHxD):
340 mm x 75 mm x 264 mm
(13-3/8 inches x 2-15/16 inches x 10-3/8 inches)
Weight:
Approx. 3.25 kg (Approx. 7.2 lb)
Switch Functions:
Camera selection, MODE ON/OFF (5600 K, Flare OFF,
Black gamma ON, Gamma OFF, Knee OFF,
White clip OFF, HD matrix ON, PM character display,
HDTV detail OFF, SDTV detail off,
HDTV skin tone detail ON, SDTV skin tone detail ON),
Control item selection (UNDO, Black shading selection,
White shading selection, R/G/B shading,
Matrix control, FUNC, System, Pedestal control,
Gain control, Gamma curve control, Flare control,
Knee/White clip control, HD detail control, SDTV detail),
ALL, Reference, Camera video output selection,
Automatic adjustment (Auto white balance,
Auto black balance, Auto setup), Monitor selection,
Scene files, SHUTTER, Gain selection,
Filter selection (HEAD, ND filter, CC filter), CALL,
Auto iris, Iris active, Master pedestal storage,
Master pedestal file call
Adjustment Functions: Iris, Master pedestal
CCU control:
RS-422 compliant
Camera (CCU) connection: Control up to 12 cameras
AK-HCU355A Camera Control Unit
Power Supply:
DC 12 V
AC 100 V to 120 V, 50 Hz/60 Hz (AK-HCU355AP)
AC 220 V to 240 V, 50 Hz/60 Hz (AK-HCU355AES/355AE)
Power Consumption:
37 W (excluding power supply)
340 W (include power supply)
Capacity for Supplying Power to a Camera:
AC 220V to 240 V, 1.2 A, 50 Hz/60 Hz (AK-HCU355AP)
AC 220V to 240 V, 1.2 A, 50 Hz/60 Hz
(AK-HCU355AES/355AE)
Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity:
10 % to 90 % (no condensation)
Dimensions (W x H x D): 200mm x 120 mm x 445 mm
(7-7/8 inches x 4-3/4 inches x 17-9/16 inches)
excluding protrusions
Weight:
Approx. 9 kg (Approx. 19.8 lb)
Video Output:
HD SDI/SD SDI x 4 lines *
1
(shared by picture monitor output 1 line *
4
)
Analogue composite x 2 lines
(shared by picture monitor output 1 line *
4
)
WFM Output:
Analogue composite x 1 line *
2
Return Input:
HD SDI/SD SDI x 4 lines
Prompter Input:
Analogue composite x 2 lines *
2
Reference Input:
Black burst/tri-level x 2 lines
(loop-through x 1 line) *
2
*
3
*
5
Sync Output:
Analogue sync, HD (±0.3 V [p-p]) / SD (1 V [p-p])
(with 75 Ω termination) x 1 line *
4
Mic Output:
0 dBm/600 Ω x 2 lines
Communication:
Intercom input/output(0 dBm, 600 Ω, 2W/RTS/4W *
4
)
x2 lines (ENG/PROD)
PGM input (0 dBm/600 Ω) x 2 lines
Tally input (Red, Green) x 1 line each
WFM CONT:
For WFM control (open collector output)
AUX:
For setting down-conversion system
(photo-coupler input)
For tally, alarm (open collector output)
TRUNK:
RS-422/RS-232C x 2 lines *
4
ROP I/F:
RS-422 x 1 line, 12 V output
MSU I/F:
RS-422 x 1 line, GPI for control
LAN:
For use with PC connections x 1 line
(10Base-T, 100Base-TX: Cross cable)
*1: Embedded audio is supported only for HD signal output.
*2: Prompter input 2 and reference input 2 share the same connector so only one of these
inputs can be selected at one time.
*3: The black burst signal and tri-level sync signal of reference input 1 are recognized
automatically.
*4: Depending on the setting, only one of these outputs can be selected at one time.
*5: Reference input 2 supports only dual sync tri-level sync signal input when the
23.98PsF format applies.
AK-HRP935A Remote Operation Panel
Power Supply:
DC 12 V (DC 10V to 17V) (supplied from CCU)
Power Consumption:
Approx. 6 W
Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F )
Operating Humidity:
Less than 80 %
Dimensions (WxHxD):
92 mm x 419 mm x 55 mm
(3-5/8 inches x 16-1/2 inches x 2-3/16 inches)
excluding protrusions
Weight:
Approx. 1.85 kg (Approx. 4.1 lb)
CCU Control:
Control signals (camera, CCU control)
RS-422 compliant
Maximum Cable Length: 50 m (164 ft)
AK-HBU3500* Build-up Unit
Power Supply:
AC 220 V, 50Hz/60 Hz
(Supplied from the studio handy camera)
Power Consumption:
20 W (main unit only)
200W (with large lens, viewfinder and maximum load
condition of AC outlet)
Operating Temperature: –10 °C to 45 °C (14 °F to 113 °F )
Operating Humidity:
Less than 85 %
Dimensions (WxHxD):
300 mm x 417 mm x 510 mm
(11-13/16 inches x 16-7/16 inches x 20-1/16 inches)
Weight:
Approx. 14.5 kg (Approx. 32.0 lb)
Adjustment Functions: H-POSI, V-POSI, WIDTH, HEIGHT,
4:3 brightness adjustment level
Switch Functions:
AC outlet reset, Viewfinder power, Up tally ON/OFF,
Center maker, Cursor memory 1, Cursor memory 2,
4:3 marker, ND filter selection, Local, CC filter selection,
Menu ON/OFF, Menu JOG, Return A switch,
Return B switch, User, Viewfinder detail,
Monitor output selection, P in P function ON/OFF,
P in P position selection
(functions not available with the AK-HC3500A)
*This model is not available in some areas.
Specifications
As of September, 2013
