120
8-6-6 TC/UB
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
TC MODE
DF
NDF
Set the time code mode.
DF:
Drop frame.
NDF:
Non drop frame.
<Note>
Regardless of the setting of this option, the
AJ-SPX800P always operates in non-drop-
frame for 24P and 24PA modes.
– C U F –
UB MODE
USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
Select the user bits mode.
USER:
Select UB value set in the LCD
section.
TIME:
Select local time (hours, minutes,
seconds).
DATE:
Select local date and time (2 last
digits of year, month, date, time).
EXT:
When “CAM” or “VIDEO” is selected
in the menu option REC SIGNAL in
the SYSTEM MODE screen, user’s
bit input to the TC IN connector is the
reference.
When “1394” is selected, user’s bit
input to the DVCPRO/DV connector
is the reference.
If reading fails, USER value is
retained.
TCG:
TCG value enters UB.
FRM RATE:
Select same camera shoting
information (frame rate, etc.) with the
VAUX UB (VITC UB).
REGEN:
Read out value stored in the card
and record value continuously.
– C U F –
VITC UB MODE USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
Select the user bits mode for VAUX TC
(VITC).
USER/EXT:
If UB MODE is set to EXT, the EXT
value is recorded. If not, USER value
set by UB is recorded.
TIME:
Select local time (hours, minutes,
seconds).
DATE:
Select local date and time (2 last
digits of year, month, date, time).
TCG:
TCG value enters UB.
FRM RATE:
Select same camera shoting
information (frame rate, etc.) with the
VAUX UB (VITC UB).
REGEN:
Read out value stored in card and
record value continuously.
<Note>
The AJ-SPX800P always operates in FRM
RATE for 24P and 24PA modes. For more
information, refer to the 24P VITC UB items.
The menu option 24P VITC UB is found in
the OPTION screen on the OPTION MENU
page.
– C U F –
TCG SET HOLD ON
OFF
ON/OFF switching for the feature that
always starts recording (when the power is
turned ON again) the TCG value that was
set before the power is turned OFF.
– C U F –
Items/
Data Saved
Adjustable
Range
Remarks
FIRST REC TC REGEN
PRESET
For the first recording after the power is
turned on, a P2 card is inserted and then
switching from this P2 card to another
recording-target P2 card is performed,
select whether or not to regenerate the time
code as the value on the new P2 card.
REGEN:
For clips recorded on the recording-
target P2 card, regenerate the time
code as the time code of the clip that
has the most recent date and time.
PRESET:
Use the camera-recorder’s internal time
code.
<Notes>
z
Set the date and time accurately. For
guidance on setting, see [4-5-2 Setting
the Internal Clock’s Date and Time].
z
During operation in either 24P or 24PA
mode, regeneration of the value of the
card recorded in drop-frame is not
permitted.
– C U F –
P.OFF LCD
DISPLAY
ON
OFF
Select whether or not to display the time
code setting and counter indication on the
LCD monitor when the power is turned OFF.
ON:
Display setting and indication while the
power is turned OFF.
OFF:
Power-down LCD monitor while
camera power is turned OFF. Setting
and indication disabled.
– C U F –
TC OUT
TCG
TCG/TCR
Select the time code to be output to the time
code output connector.
TCG:
Always output time code generator
value.
TCG/TCR:
Display time code generator value in
E-E mode, and time code reader value
in V-V mode.
– C U F –
TC DISP SEL
30F
24F
Select the display format for the time code
frame digits.
30F:
Display time code frame digits in 30
frames.
24F:
Convert time code frame digits into 24
frames for display.
– C U F –
#,52:2'PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧟㧝ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧠㧥ಽ
