9
Chapter 2 Parts and their functions
2
2-2
Audio function section (input system)
1
2
3
5
6
7
9
; :
<
=
>
?
@
4
8
1
MIC IN (microphone input) jack (XLR, 3-pin)
Connect the microphone (optional accessory) here. The
power for the microphone is supplied from this jack.
It is possible to use a stereo microphone; however, this
jack will need to be converted to a stereo microphone jack,
so please consult your dealer or a service center specified
by your dealer.
3
AUDIO SELECT CH1/CH2 (audio channel 1 &
2 automatic/manual level adjustment
selector) switch
This is used to select the method for adjusting the
recording levels of audio channels 1 and 2.
AUTO:
Set here for automatic adjustment.
MAN:
Set here for manual adjustment.
2
AUDIO LEVEL CH1/CH2 (audio channel 1 & 2
recording level adjustment) controls
When the AUDIO SELECT CH1/CH2 switch
3
is set to
MAN, the recording level of audio channels 1 and 2 can be
adjusted using these controls.
The controls come with a locking mechanism. Therefore,
to adjust the recording level, simultaneously push in and
turn the controls.
4
AUDIO IN (audio input selector) switch
These are used to select the input signals to be recorded
on audio channels 1, 2, 3 and 4.
FRONT:
The input signals supplied from the
microphone which has been connected
to the MIC IN jack
1
are recorded.
W.L. (wireless):
The input signals from the slot-in
wireless microphone receiver are
recorded.
REAR:
The audio input signals supplied from
the audio component which has been
connected to the AUDIO IN CH1/CH2
connectors
5
are recorded.
5
AUDIO IN CH1/CH2 (audio input channel 1 &
2) connectors (XLR, 3-pin)
An audio component or microphones are connected here.
6
LINE/MIC/+48V (line input/mic input/mic
input + 48V) selector switch
This is used to switch the audio input signals from the
audio component which has been connected to the AUDIO
IN CH1/CH2 connectors
5
.
LINE:
The audio input signals from the audio component
serving as the line input are selected.
MIC:
The audio input signals from the internal power
supply type of microphone are selected. (The
phantom mic power is not supplied from the unit.)
+48V:
The audio input signals from the external power
supply type of microphone are selected. (The
phantom mic power is supplied from the unit.)
7
Wireless receiver slot
The UniSlot® wireless receiver (optional accessory) can
be attached here.
8
FRONT AUDIO LEVEL (audio recording level
adjustment) control
This enables the recording level of audio channels 1 and 2
to be adjusted. This level can be adjusted regardless of
the setting position of the AUDIO SELECT switch.
When the <MIC/AUDIO1> screen is opened from the VTR
MENU page by performing a menu operation, whether to
enable or disable the operation of this level control can be
set using the FRONT VR CH1 and FRONT VR CH2
setting items.
