Panasonic AJSD930P, Operating Instructions Manual

Page: 32 / 81

32
Setup menus
SYSTEM menu
No./Item Description
The underlined items indicates the initial setting.
00
WFM SEL
This selects the signal to output from the
VIDEO OUT 2 connector.
0000 CTL : The CTL signal is output.
0001 TC : The TIME CODE signal is
output.
0002 VIDEO : The VIDEO OUT signal is
output.
0003 RF_L : The PB L RF signal is output.
0004 RF_R : The PB R RF signal is output.
0005 ENV_L : The PB L ENV signal is output.
0006 ENV_R : The PB R ENV signal is output.
<Notes>
O
The settings can be changed at any time
regardless of the setup menu item No. 30
(MENU LOCK) setting.
O
During normal playback, the output signals
have levels which are virtually identical to the
values given below under a 75
Ω
termination.
CTL: 0.1 to 0.3 Vp-p TC: 0.6 Vp-p
VIDEO: 1.0 Vp-p
10
ENCODER
SEL
This selects whether the video output signal
is to be adjusted with the VTR or with the
external encoder remote control.
0000 REMOTE :
Video output signals are adjusted with the
external encoder remote control.
0001 LOCAL :
Video output signals are adjusted with the
VTR.
11
SYS SC
COAR.
Coarse adjustment of system phase: 90° units
0000 0
0001 90
0002 180
0003 270
12
SYS SC FINE
Fine adjustment of system phase:
Variable range ±45° or more
–: Advanced, +: Delayed
0000 –128
: :
0128 0
: :
0255 127
13
SYS H
System phase adjustment: 74 ns steps
–: Advanced, +: Delayed
0000 –128
: :
0108 0
: :
0216 127
No./Item Description
14
SCH COARSE
SCH phase adjustment: 90° units
(The SC phase changes but the H phase does
not change.)
–: Advanced, +: Delayed
0000 0
0001 90
0002 180
0003 270
15
SCH FINE
SCH phase adjustment:
Total variable range: ±45° or more
(The SC phase changes but the H phase does
not change.)
–: Advanced, +: Delayed
0000 –32
: :
0032 0
: :
0064 32
16
AV PHASE
This adjusts the audio output phase with
respect to the video output:
20.8 µs steps
–: The audio output phase is advanced with
respect to the video output.
+: The audio output phase is delayed with respect
to the video output.
0000 –128
: :
0128 0
: :
0255 127
<Note>
If setting operation is
performed, the setting value
does not return to factory
(default) setting.
<Note>
If setting operation is
performed, the setting value
does not return to factory
(default) setting.
<Note>
If setting operation is
performed, the setting value
does not return to factory
(default) setting.