– 63 –
{
C AME R A
I D
I D :
¢|
E E E E E E E
E
E E
Status Displays Inside the Viewfinder Screen
Setting the Camera ID
The camera ID can be set at the CAMERA ID page of the setting menu.
A camera ID of up to ten characters including English letters, symbols and spaces can be used.
The camera ID is recorded when the OUTPUT/AUTO KNEE switch is set to BARS and the color
bar signal is being recorded. It is also displayed on the viewfinder screen.
|
Note
{
When the setting menu is displayed, the camera ID is not displayed even if the color bar signal is
output.
Setting the Camera ID
1
Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP
button are held down together.
2
Press the PAGE button to display the MAIN menu screen 2 of 4.
3
Press the SHIFT/ITEM button to move the cursor to the “CAMERA ID” position.
4
Press the UP or DOWN button to open the CAMERA ID page.
: The cursor is moved to the right (max. 10 spaces) by the
SHIFT/ITEM button.
: Alphanumerics, symbols and spaces are selected by the
UP and DOWN buttons.
5
Keep pressing the UP (or DOWN) button until the character to be set appears.
Each time the UP button is pressed, the character display changes in the following order:
space (
Å
)
¢
english letters (A to Z)
¢
numbers (0 to 9)
¢
symbols (space,
{
,
|
, ), (, ’, ‘, ,, --,
_ ,
x
, /, !). Pressing the DOWN button changes the character display in the reverse order.
6
Press the SHIFT/ITEM button to move the cursor to the next position, and return to step 5 to
set the characters.
7
When the menu operations are completed, set the MENU SET/OFF switch to the OFF
position.
The setting menu is cleared from the viewfinder screen, and the unit’s current statuses ap-
pear at the top and bottom of the viewfinder screen.
|
Note
{
When CAMERA ID on the VF INDICATOR page has been set to ON, the above camera ID setting
will be recorded along with the color bars.
