
E-3
Installation in AJ-HPX2000/2100
1
Unscrew the two screws from the AJ-
YBX200G to remove the bracket.
2
Be sure that the power of the AJ-HPX2000/
2100 is turned off.
3
Unscrew the six screws on the left side of
the AJ-HPX2000/2100 (on the left as
viewed from the front) to remove the side
panel.
4
Unlock the two parts to disconnect the two
flexible cables, and then remove the No.5
board.
5
Disconnect the cable from the No.5 board
removed in Step
4
. In this operation, the
cable may become disconnected if pulled,
so remove it while holding the connector.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire
or electric shock do not perform any servicing other than as directed in the operating instructions
unless you are qualified to do so.
Screws
Bracket
Screws
Unlock
Flexible
Cables
No. 5
board
Slot
Cable
Connector
00.AJ-YBX200G(VQT1K80).book 3 ページ 2007年7月6日 金曜日 午後7時40分