Panasonic AJ-SPC700E Operating Instructions Manual Download

Page: 13 / 124

Chapter 2 Parts and their Functions

(continued)

2-3 Audio (output) Function Section

AUDIO OUT connector (XLR, 3-pin)

This connector outputs audio signals recorded on
Channels 1, 2, 3 or 4.
Output signals are selected with the MONITOR
SELECT CH1/2 / CH3/4 selector switch.

MONITOR SELECT (audio channel) CH1/2 /
CH3/4 selector switch

Use this switch to select the audio channel whose
signals are output to the speakers, earphones or AUDIO
OUT connector.

CH1/2:

Signals on Audio Channels 1 and 2 are output.

CH3/4:

Signals on Audio Channels 3 and 4 are output.

The channel indications on the display window and on
the audio level meter in the viewfinder are synchronised
with this selector switch.
When a voice memo is being played back, the recorded
voice is output to the speakers and earphones,
regardless of the switch position.

MONITOR SELECT (audio selection) CH1/3 / ST
/ CH2/4 selector switch

The MONITOR SELECT switch is synchronised with the
audio signal output to the speakers and earphones, and
from the AUDIO OUT connector.

CH1/3:

Signal on Audio Channel 1 or 3 is output.

ST:

Stereo audio signals on Audio Channels 1 and
2 or Audio Channels 3 or 4 are output. The
stereo signals can be changed to mixed
signals using a menu option.

CH2/4:

Signal on Audio Channel 2 or 4 is output.

<Note>

Output stereo signals to the PHONES (earphones) jack
in the ST mode. Output MIX signals to the AUDIO OUT
jack and to speakers.

* You can select between stereo and mixed signal types using

the menu option MONITOR SELECT. This menu option can be
found in the <MIC/AUDIO2> screen on the MAIN OPERATION
page.

MONITOR (volume) control

Used to control the volume of sound output from the
monitor speakers and earphones.

ALARM (warning alarm volume adjustment)

Used to control the volume of the warning sound emitted
from

speakers or earphones connected to the

PHONES jack.
If the control is minimised, no alarm is audible.

Speakers

The speakers output EE sound during recording, and
reproduced sound during playback.
The speakers emit an alarm sound when the warning
lamp blinks and/or the indicator activates.
When the

PHONES jack is connected with

earphones, sound from the speaker is automatically
muted.

PHONES (earphones) jack (mini jack)

This connector is designed for audio monitoring (stereo)
earphones. When earphones are connected, sound
from the speakers is automatically muted.
Both the front and rear connectors output the same
sound.

DC OUT (DC power supply) output socket

This output socket is designed for 12-VDC. It provides a
maximum current of 1 A.

Voice memo microphone

Used to record a voice memo.
For more information on voice memos, see [3-8 Voice
Memo Function].

VOICE MEMO button

Used to record a voice memo during recording or
playback, or recording or playback is paused. Another
press of the button stops voice memo recording.

Monitor

switch

MONITOR SELECT switch

CH1/2

CH3/4

CH1/3