94
Chapter 7 Menu description tables
CONTENTS
BATTERY SELECT
AJ-BP490
AU-BP402
HP-30A
PRO14
TRIM14
HYTRON50
HYTRON100
DIGITAL14
DIGITAL13
DIONIC
BP-H120
NP-L50
NP-L50D
ENDURA50
ENDURA80
BP-L60/90
NP-1B
TYPE A
TYPE B
For selecting the type of battery to be used.
The remaining charge is detected in
accordance with the battery which has been
selected.
The variable range is changed by the item
settings selected on the “7-8-3 BATTERY
SETTING1” and “7-8-4 BATTERY
SETTING2” menus.
Note that the initial value for TYPE A
corresponds to the PROFORMER and for
initial value for TYPE B to the HYTRON100,
both of which are manufactured by Anton
Bauer.
BATT NEAR END
ALARM
ON
OFF
For setting whether or not to output the
warning tone when the battery charge is
nearly depleted.
TAPE NEAR END
ALARM
ON
OFF
For setting whether or not to output the warning
tone when the tape is nearly at its end.
TAPE NEAR END
TIME
3min
2min
For setting the remaining tape time at which
to sound the warning that the tape has only
the designated amount of time (2min. or
3min.) remaining.
TAPE END ALARM
ON
OFF
For setting whether or not to output the
warning tone when the tape reaches the end.
BATT REMAIN
FULL
100%
70%
For setting when the remaining charge display
bar on the LCD is to be displayed when a
digital battery is used.
70%:
A full charge is indicated with a 70% display
100%:
A full charge is indicated with a 100% display.
BATT NEAR END
CANCEL
ON
OFF
When this item is set to ON, the warning tone
and the warning display which are being
output can be canceled by pressing the
MODE switch when the battery charge is
nearly depleted.
BATT END ALARM
ON
OFF
For setting whether or not to output the warning
tone when the battery charge is depleted.
TAPE REMAIN/
∫
5min/
∫
3min/
∫
For setting the time of each segment (
∫
) that
makes up the remaining time display bar on
the LCD.
5min:
Each segment denotes a remaining
time of 5 minutes.
3min:
Each segment denotes a remaining
time of 3 minutes.
7-8-2
BATTERY/TAPE
Item
Variable
range
Remarks
EXT DC IN
SELECT
AC_ADPT
AJ-BP490
AU-BP402
HP-30A
PRO14
TRIM14
HYTRON50
HYTRON100
BP-H120
NP-L50
ENDURA50
ENDURA80
BP-L60/90
NP-1B
TYPE A
TYPE B
The variable range is changed by the item
settings selected on the “7-8-3 BATTERY
SETTING1” and “7-8-4 BATTERY
SETTING2” menus.
7-8-3
BATTERY SETTING1
AJ-BP490*
¢
/
AUTO
MANUAL
For enabling or disabling the selection made
for the BATTERY SELECT item.
¢
:
The selection is enabled.
/:
The selection is disabled.
For selecting how the voltage at which the
battery charge is considered nearly depleted
is to be set.
AUTO:
The voltage is set automatically.
MANUAL:
The voltage is set manually.
11.0
:
11.5
:
15.0
For selecting, when MANUAL has been
selected as the setting for the menu item above,
in 0.1 V steps the voltage at which the battery
charge is to be considered nearly depleted.
AU-BP402
¢
/
AUTO
MANUAL
For enabling or disabling the selection made
for the BATTERY SELECT item.
¢
:
The selection is enabled.
/:
The selection is disabled.
For selecting how the voltage at which the
battery charge is considered nearly depleted
is to be set.
AUTO:
The voltage is set automatically.
MANUAL:
The voltage is set manually.
11.0
:
11.5
:
15.0
For selecting, when MANUAL has been
selected as the setting for the menu item above,
in 0.1 V steps the voltage at which the battery
charge is to be considered nearly depleted.
HP-30A
¢
/
AUTO
MANUAL
For enabling or disabling the selection made
for the BATTERY SELECT item.
¢
:
The selection is enabled.
/:
The selection is disabled.
For selecting how the voltage at which the
battery charge is considered nearly depleted
is to be set.
AUTO:
The voltage is set automatically.
MANUAL:
The voltage is set manually.
11.0
:
12.0
:
15.0
For selecting, when MANUAL has been
selected as the setting for the menu item above,
in 0.1 V steps the voltage at which the battery
charge is to be considered nearly depleted.
PRO14
¢
/
AUTO
MANUAL
For enabling or disabling the selection made
for the BATTERY SELECT item.
¢
:
The selection is enabled.
/:
The selection is disabled.
For selecting how the voltage at which the
battery charge is considered nearly depleted
is to be set.
AUTO:
The voltage is set automatically.
MANUAL:
The voltage is set manually.
11.0
:
13.8
:
15.0
For selecting, when MANUAL has been
selected as the setting for the menu item above,
in 0.1 V steps the voltage at which the battery
charge is to be considered nearly depleted.
Item
Variable
range
Remarks
* Select this item for the HP-90 or HP-90A manufactured by PACO.
