– 106 –
Chapter 5 Playback — Thumbnail operations
3
Press the <SET> button to enter the item menu. (Fig. 2)
The selected item has a check mark on it.
4
Press the <SET> button.
Pressing the <SET> button will check unchecked items and uncheck items that are already checked.
@
@
NOTE
t
Property items can be displayed by selecting [SMALL] in the main menu
→
[CLIP]
→
[THUMBNAIL SETUP]
→
[THUMBNAIL SIZE].
t
A maximum of six items can be displayed at the same time.
t
When six items are already selected, all unchecked items cannot be selected. You can change your item selection by unchecking selected items.
Displaying the number of clips and playback time
Display the number of selected clips and playback time of clip, etc.
1
Select [THUMBNAIL INFO.] from the main menu
→
[CLIP]
→
[THUMBNAIL SETUP].
2
Use the cursor buttons to place the cursor on the item you want to set.
[NUM. OF CLIPS]:
Displays the number of selected clips.
[DUR. OF SEL CLIPS]:
Displays the total playback time of selected clips.
[TOTAL DURATION]:
Displays the total playback time of the displayed clip.
3
Press the <SET> button.
Changing thumbnails
Replace thumbnails with images that include previously attached text memos while images are recorded or played back.
Fig. 1
Fig. 2
1
Add text memos to images to be changed.
For details on adding text memos, refer to “Text memo recording function” (page 70).
2
Select [TEXT MEMO CLIPS] in the main menu
→
[CLIP]
→
[REPOSITION] and display the thumbnails of clips with text memos.
3
Move the cursor over the clip where you want to change the thumbnail and press the <SET> button, and then move the cursor to
the text memo display on the lower row.
4
Select the thumbnail to be replaced from the text memos, place the cursor on it, and select [EXCH. THUMBNAIL] in the main
menu
→
[CLIP]. (Fig. 1)
5
Press the <SET> button, and select [YES] using the cursor buttons on the confirmation screen that is displayed.
The menu closes and the thumbnail for the clip is replaced. (Fig. 2)
@
@
NOTE
t
You can view the thumbnail position (number of frames from the top of the clip) from the [THUMBNAIL] item of the clip information display. Since
thumbnails usually come from the top of the clip, 0 is displayed.
t
Even if you change the thumbnail, playback from the thumbnail screen will still start from the beginning of the clip.
t
The thumbnail image with the [!] mark may be displayed for clips of a format with a different number of lines and frequencies when displaying a text
memo clip without displaying the thumbnail of the text memo position displayed at the bottom section.
Shot mark
Shot marks can be added to a clip thumbnail to distinguish the clip from other clips.
You must assign [SHOT MARK] to the USER button beforehand. For details, refer to “Assigning functions to USER buttons” (page 60).
1
Use the cursor buttons to move the cursor over the clip to which you want to add a shot mark.
2
Press the USER button to which [SHOT MARK] is assigned.
f
A shot mark is added to the thumbnail of the clip at the cursor position.
f
To delete a shot mark, place the cursor on the clip again and press the USER button to which [SHOT MARK] is assigned.
