– 43 –
Chapter 3 Recording and Playback — Special recording functions
- A shot mark is added only to the top clip among combined clips.
Text memo recording function
Text memos can be added to any video point while a clip is being recorded or played back.
Only clips with a text memo added can be selected and displayed as thumbnails. Also, thumbnails at text memo positions can be displayed in order and
played back from text memo points, and only required portions can be selected and copied. (page 128)
Adding text memos
1
Make sure that [TEXT MEMO] is set to in the main menu
→
[CAMERA]
→
[USER SW]
→
[TEXT MEMO (U4)].
f
If it is set, the text memo function is assigned to the <TEXT MEMO> button.
f
The text memo function can be assigned to the <RET> button. To assign the function to the <RET> button, set [TEXT MEMO] in the main menu
→
[CAMERA]
→
[SW MODE]
→
[RET SW].
2
During recording or a playback, press the button to which the text memo is assigned.
[TEXT MEMO] is displayed, and the text memo is added to the video clip that was displayed when the button was pressed.
@
@
NOTE
t
Up to 100 text memos can be recorded to a single clip.
t
Text memos cannot be added during loop recording, interval recording, or one-shot recording. If the operation is invalid, [TEXT MEMO INVALID] is
displayed when the button is pressed.
