– 132 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
[SHOOT]
Displays [SHOOTER] (name of the person who shot the video), [START DATE] (start date of shooting), [END DATE] (end date of
shooting), and [LOCATION]/[ALTITUDE]/[LONGITUDE]/[LATITUDE]/[SOURCE]/[PLACE NAME] (altitude, longitude, latitude, and
source of the information and name of the location).
[SCENARIO]
Displays [PROGRAM NAME], [SCENE NO.], and [TAKE NO.].
[NEWS]
Displays [REPORTER] (name of the reporter), [PURPOSE] (purpose of shooting), and [OBJECT] (object of shooting).
[MEMO]
*
2
Displays [NO.] (the number of the text memo), [OFFSET] (location of the frame where the text memo is added), [PERSON] (person
who recorded the text memo added to the clip), and [TEXT] (content of the text memo).
[THUMBNAIL]
Displays the location of the frame (frame offset) and the size (height and width) of the image selected as the thumbnail image.
[PROXY]
Displays information such as proxy format when proxy is added.
*1 You can select the [USER CLIP NAME] recording method. For details, refer to “Selecting the [USER CLIP NAME] recording method” (page 132).
*2 When entering [MEMO], make sure to enter [TEXT]. It is not possible to record only [PERSON] (the person inputting the memo), or [OFFSET] (the recording
position).
Checking and modifying uploaded metadata
Details of metadata uploaded from an SD memory card can be checked.
Fig. 1
Fig. 2
1
Select [PROPERTY] in the main menu
→
[REC/PB]
→
[REC META DATA].
The metadata list is displayed.
2
Use the cursor buttons to move the cursor over the item to be checked, and press the <SET> button. (Fig. 1)
Settings of the uploaded metadata can be checked.
3
While checking the settings for the metadata, use the cursor buttons to move the cursor over the item where you want to change
the setting, and press the <SET> button.
f
A software keyboard screen is displayed, allowing you to modify the setting. (Fig. 2)
f
While holding down the <SHIFT> button, press the cursor buttons (
`
/
{
) to move to the beginning or end of the setting details to be changed.
Setting whether to record the uploaded metadata
Set [ON]/[OFF] in the main menu
→
[REC/PB]
→
[REC META DATA]
→
[RECORD]. This item is set to [OFF] in the factory settings.
Selecting the [USER CLIP NAME] recording method
In the main menu
→
[REC/PB]
→
[REC META DATA]
→
[USER CLIP NAME], select the [USER CLIP NAME] recording method from either [TYPE1] or
[TYPE2].
r
[TYPE1] (factory settings)
Status of clip metadata
[USER CLIP NAME] to be recorded
When clip metadata has been loaded
Uploaded data
When no clip metadata has been loaded, or when setting disables recording of loaded clip
metadata
Same as [GLOBAL CLIP ID]
