manualshive.com logo in svg

Panasonic AJ-PX380G, Operating Instructions Manual

Share
Download
Panasonic AJ-PX380G Operating Instructions Manual Download Page 182

– 182 –

Chapter 9 Connecting to External Devices — Connection through the <USB2.0> terminal

Clip thumbnail display of the storage device

Displaying thumbnails

You can display and manage clips saved in a storage device, as well as display the thumbnail screen for clips saved in a P2 card attached to the 
camera.

<SET>

<EXIT>

1 

Open the explorer screen.

Partitions or folders are displayed in a list.

2 

Use the cursor buttons to place the cursor on the partition or folder you want to display on the thumbnail screen, and press the 

<SET> button.

This displays the thumbnails of clips in the partition or folder. You can go back to the main explorer screen by clicking the <EXIT> button.

@

@

NOTE

 

t

When target partitions are selected, you can display thumbnails in all partitions selected as targets by pressing the <SET> button while holding down 
the <SHIFT> button.

 

r

Information display items

1

1  Storage device information

 

f

For [TYPE S]

[SERIAL]: 

P2 card serial number

[MODEL]: 

Model name of P2 card

[SELECTED PART.]: 

Displays a checkmark when a target partition is selected.

[SELECTED PART. NO.]: 

List of selected partition numbers (only displayed when multiple partitions are selected)

[NO.]: 

Partition number

[DATE]: 

Partition record date

[TIME]: 

Partition record time

[VERIFY]: 

Verification settings and results during recording, [ON/FAILED]

 

-

[ON/FINISHED]: Verification performed. Items match.

 

-

[ON/FAILED]: Verification performed but no match found. (For [P2STORE], [

−−

] is displayed.)

 

-

[OFF]: Verification not performed

[NAME]: 

Partition name defined by the user

[SIZE]: 

Total capacity of the storage device

[USED]: 

Used storage device capacity

[FREE CAP.]: 

Remaining storage device capacity

 

f

For [FAT]

[SELECTED PART.]: 

Displays a checkmark when a target partition is selected.

[SELECTED PART. NO.]: 

List of selected folder numbers (only displayed when multiple folders are selected)

[NO.]: 

Folder number

[DATE]: 

Folder creation date

[TIME]: 

Folder creation time

[FOLDER]: 

Folder name (creation date and time are not displayed in the root folder)

[SIZE]: 

Total capacity of the storage device

Summary of Contents for AJ-PX380G






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands