Panasonic AJ-PX270EJ, Operating Instructions Manual

Page: 37 / 190

– 37 –
Chapter 3 Preparation — Assigning functions to the USER buttons
Assigning functions to the USER buttons
Selected functions can be assigned to USER1 to USER8.
Set the functions to be assigned to [USER1] to [USER8] in the main menu
→ [USER SW].
Check the setting details using the <DISP/MODE CHK> button.
The following button functions are assigned to USER1 to USER8 as the factory settings. (The numbers of the USER buttons are displayed in the
camera.)
f
USER1: <FOCUS ASSIST>
f
USER2: <MACRO>
f
USER3: <OIS>
f
USER4: <ZEBRA>
f
USER5: <WFM>
f
USER6: <A.IRIS.LEVEL>
f
USER7: <SLOT SEL>
f
USER8: <IRIS>
USER2
USER5
USER6
USER8
USER1
USER3
USER4
USER7
Selectable functions
Item Description
[INHIBIT] Disables assignment of functions.
[SCENE FILE SEL] Assigns the function to display the screen (the main menu → [SCENE FILE] → [FILE SELECT]) in which users select the scene file.
[LEVEL GAUGE
RESET]
Assigns the function to set the level gauge using the current horizontal and vertical directions as reference values. Holding down the
assigned button will reset to the factory setting.
[WFM]
Assigns the function for switching the waveform display. Select the waveform display from the main menu → [SW MODE] → [WFM
MODE].
[D.ZOOM] Assigns the digital zoom function. Zooms in on the field angle by 2x, 5x, and 10x vertically and horizontally.
[DRS] Assigns the dynamic range stretcher function.
[FBC] Switches the flash band compensation function to enabled/disabled.
[S.GAIN]
Assigns the function that increases the gain to 24 dB or more. Select the gain value from the main menu → [SW MODE] → [SUPER
GAIN].
[1S.EXP.] Enables/disables the one second exposure function.
[ATW] Switches the auto tracking white balance functions to enabled/disabled.
[ATW LOCK]
Fixes the white balance value when pressing this item while the auto tracking white balance function is activated. Resumes the auto
tracking white balance function when pressing again.
[SPOTLIGHT] Switches the auto iris control function for the spot light to enabled/disabled.
[BACKLIGHT] Switches the auto iris control function for the backlight compensation to enabled/disabled.
[BLACKFADE] Assigns the functions that fade out the entire image as black.
[WHITEFADE] Assigns the functions that fade out the entire image as white.
[A.IRIS.LEVEL] Switches the auto iris setting function to enabled/disabled.
[IRIS] Assigns the function for switching the auto iris and manual iris.
[Y GET]
Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the
center.
[FOCUS ASSIST] Switches the manual focus assist display to on/off.
[FOCUS MACRO] Switches the macro focus setting. You can set the macro function effects in the main menu → [SW MODE] → [MACRO MODE].
[OIS] Switches the image stabilizer to enabled/disabled.
[FAST ZOOM] Speeds up the zoom speed when the zoom lever (with the HANDLE ZOOM switch at the handle side set to <VAR>) is pushed in to the
end.
[ZEBRA] Assigns the display function of the zebra pattern and marker.
[EVF ON/OFF] Assigns the function that forces images to be displayed in the viewfinder.
[PRE REC] Assigns the function for switching the pre-recording function to enabled/disabled.
[TEXT MEMO] Assigns the text memo function.
[SHOT MARK] Assigns the shot mark function.