11
Installation
(continue)
7
Connect the AC adapter included with the
P2 drive to the unit’s DC IN 16V socket.
Start up the P2 drive.
Check that the green light on the unit’s
power indicator turns on and that the
status indicators for all card slots blink
about once per second.
8
Start up the personal computer.
9
Verify that the personal computer
recognises the P2 drive.
<Notes>
z
In Windows XP or Windows Vista, some card
slots of the P2 drive may be assigned drive
names that have already been assigned to
existing networks. Reassign network drive
names if your personal computer does not
display all five card slots.
z
Since the P2 drive does not support hot-
plugging, do not insert or remove the PCI
EXPRESS cable with the personal computer
power on.
z
While the P2 drive and the personal computer
are connected, do not insert or remove the
unit’s AC adapter when the personal computer
is on. If the personal computer is on with the
unit off, before turning the unit on, turn the
personal computer off.
DC IN 16V
DC IN 12V
AJ-PCD35(VQT1X46)_E.book 11 ページ ２００８年１０月２０日 月曜日 午後２時４７分
