13
• Three HD codecs supported: AVC-Intra100 for high-quality 10 bit 4:2:2
images, AVC-Intra50, and DVCPRO HD.
• 1080i and 720p recording and playback. 59.94 Hz/50 Hz switchable.
• 1080/24PsF in/out, native 24p recording with the AVC-Intra codec.
• SD (480/59.94i and 576/50i) codec supports DVCPRO 50, DVCPRO, and DV.
• Allows up-/down-conversion between HD and SD as well as cross-
conversion between 720 and 1080 during playback, and up-conversion
during recording.
• Hot-swap, loop rec and VANC recording.*
1
It supports high-quality 24 bit
audio (AVC-Intra100/50).*
2
• Equipped with six P2 card slots and one SD card slot.
• Easy manual on-air transmission with one-clip playback and GUI hold.
• New playlist function includes advanced GUI and new functions such as
independent AV tracks, insert/overwrite modes.
• It newly supports VDCP command via RS422 for supplying clip list to the
controller.*
2
• Recognize newly inserted P2 card during playback mode for emergency
program change.*
2
• Direct capture from an external VTR source onto the editing time-line via an
RS-422A interface.
• Supports a simplified waveform and vectorscope display.
• Gigabit-Ethernet-compatible server/client function enables direct file
transfer via internet. It supports reading and writing on P2 cards from an
external server and PC.*
2
• eSATA and USB 2.0 interfaces enable max. 4X (AVC-Intra100 or DVCPRO HD)
high-speed copying to an external HDD and playback.*
3
• AVCHD compatibility: playback, recording and cross-conversion between
P2HD/AVCHD (with the optional AJ-YCX250G board).
• HD/SD SDI In/Out and AES/EBU digital audio In/Out.
• Analog I/O and versatile remote (RS-422A, RS-232C and parallel).
• 4U-size height for mounting into a 19 type rack (with optional adaptor).
*1: VANC recording is only possible at 59.94 Hz and 50 Hz.
*2: You may need to update its firmware. Please refer to the “service and support” on the Panasonic
Website (http://pro-av.panasonic.net/).
*3: Playback is based on disk drive performance, including spindle speed. Panasonic cannot guarantee
smooth playback without dropped frames.
AJ-HPD2500
A P2 Deck Enhances File-Based Broadcasting Workflows with
Versatile Editing, Transmission and Networking Functions.
It Supports 24 bit Audio.
AJ-HPD2500 Specification
Power Source :
AC 100 V to 240 V, 50 Hz/60 Hz
Power Consumption :
Max. 65 W (full option)
Weight:
approx. 13 k
g
(28.7 lb)
Dimensions (W x H x D): 424.0 mm x 175.2 mm x 414.7 mm
(16-3/4 inches x 6-15/16 inches x 16-3/8 inches)
without support legs, connector and jog dial
AJ-HPM200
Advanced P2 Mobile with Versatile Functions Such as Networking,
AVCHD Compatibility (Optional) and eSATA Interface.
It Supports 24 bit Audio.
• Three HD codecs supported: AVC-Intra100 for high-quality 10 bit 4:2:2
images, AVC-Intra50, and DVCPRO HD.
• 1080i and 720p recording and playback. 59.94 Hz/50 Hz switchable for any
HD system worldwide.
• 1080/24PsF input/output, native 1080/24p recording (AVC-Intra).
• SD (480/59.94i and 576/50i) codec supports DVCPRO 50, DVCPRO, and DV.
• Allows up-/down-conversion between HD and SD as well as cross-
conversion between 720 and 1080 during playback, and up-conversion
during recording.
• Hot-swap, loop rec and VANC recording.*
1
It supports high-quality 24 bit
audio (AVC-Intra100/50).*
2
• Equipped with six P2 card slots and one SD c ard slot.
• Play-list function includes advanced GUI and new functions such as
independent AV tracks, insert/overwrite modes.
• It newly supports VDCP command via RS422 for supplying clip list to the
controller.*
2
• Recognize newly inserted P2 card during playback mode for emergency
program change.*
2
• Direct capture from an external VTR source onto the editing time-line via an
RS-422A interface.
• Supports simplified waveform monitor and vectorscope display.
• Gigabit-Ethernet-compatible server/client function enables direct file
transfer via internet. It supports reading and writing on P2 cards from an
external server and PC.*
2
• eSATA and USB 2.0 interfaces enable max. 4x (AVC-Intra100 or DVCPRO HD)
high-speed copying to an external HDD and playback.*
3
• AVCHD compatibility: playback, recording and cross-conversion between
P2HD/AVCHD (with the optional AJ-YCX250G board).
• HD/SD SDI input/output provided to allow line recording.
Enables REC Start/Stop in sync with camera recorder.
• IEEE 1394a (AVC) interface enables DVCPRO HD/SD stream in/out
.
*1: VANC recording is only possible at 59.94Hz and 50Hz.
*2: You may need to update its firmware. Please refer to the “service and support” on the Panasonic
Website (http://pro-av.panasonic.net/).
*3: Playback is based on disk drive performance, including spindle speed. Panasonic cannot guarantee
smooth playback without dropped frames.
AJ-HPM200 Specification
Power Source :
AC 100 V to 240 V, 50 Hz/60 Hz / DC 12 V
Power Consumption :
AC: 60 W, DC: 12 V/4.8 A (full-option)
Weight:
approx. 6.6 k
g
(14.6 lb)
Dimensions (W x H x D): 301 mm x 120 mm x 412 mm
(11-7/8 inches x 4-3/4 inches x 16-1/4 inches)
without rubber shoes
memory Card recorder/Player “P2 deck”
memory Card recorder /Player “P2 mobile”
