– 88 –
Setup Card Operations
Setup Card Data Operations
Operations to store setting data on setup cards and read out stored data are performed at the
“CARD READ/WRITE” SUB menu page of MAIN menu screen 2 of 4.
|
Note
{
When operating the unit with a remote controller, the CARD READ/WRITE page cannot be oper-
ated from the unit.
Formatting setup cards
1
Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP
button are held down together.
2
Press the PAGE button to display the MAIN menu screen 3 of 4.
3
Press the SHIFT/ITEM button to move the cursor to the “CARD READ/WRITE” position.
4
Press the UP or DOWN button to open the CARD READ/WRITE page.
5
Press the SHIFT/ITEM button repeatedly to move the cursor to the CARD CONFIG. position.
6
A menu shown below appears when the UP (or DOWN) button is pressed.
7
Press the UP button to format the set up card. When the setup card has been formatted, the
message shown below appears.
|
Note
{
When setup cards are formatted, the setting conditions at that time are also input simulta-
neously.
8
When menu operations have been completed, return the MENU SET/OFF switch to OFF.
The setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
{
C A R D
C A R D
R E A D
R E A D
/ WR I T E
ON
C
F I G ? ( Y : U P . N :
WR I T E
R E A D
DOWN )
S E L E C T
S E L E C T
1
1
CON F I G
U S E R D A T A
|
¢
{
C A R D
C A R D
R E A D
R E A D
/ WR I T E
WR I T E
R E A D
S E L E C T
S E L E C T
1
1
CON
O K
F I G
U
OR
F
MA T
S E R D A T A
|
¢
{
C A R D
C A R D
R E A D
R E A D
/ WR I T E
WR I T E
R E A D
S E L E C T
S E L E C T
1
1
CON F I G
U S E R D A T A
¢|
