– 13 –
14
a
a
Power Zoom Lens (option)
7
Lens cable (12-pin)
This cable is to be connected to the LENS
connector.
8
Focus ring
This ring is turned to focus the lens.
9
Zoom ring
To adjust the screen size, set the power/manual
zoom selector switch to MANU,and turn this ring.
1
Automatic iris control
This enables the automatic iris speed to be
adjusted.
Removal of the rubber cap reveals the control
inside. The speed is increasing by turning the
control clockwise but take care not to turn it too far
since hunting (continuous cycling) will occur.
This control must be adjusted when the lens has
been replaced or when a lens has been mounted
for the first time.
2
Lens iris selector switch (IRIS)
(A) side: The iris is adjusted automatically.
(M) side: Set to this position to adjust the iris
manually.
3
Power zoom control switch
The zoom can be controlled electrically by setting
the power/manual zoom selector switch to SERVO
and then pressing the power zoom control switch.
The zoom speed differs depending on the force
with which the switch is pressed.
4
Hand strap
Adjust this to fit the size of your hand.
5
Return switch (RET, REC CHECK)
This switch is for checking a recording. When it is
pressed in the recording pause mode, the
recording check function is activated, the recorded
section is played back, and then the recording is
placed in the pause mode.
6
VTR start/stop switch
This switch provides easy manual access to
starting and stopping the VTR recording. When it
is pressed once, recording starts; when it is
pressed again, it stops. When using this lens, the
VTR can be controlled by this switch or the VTR
start/stop switch on the camera.
1
7
8
:
;
=
>
2
3 5
4 6
<
9
