Panasonic AH1, Quick Start Manual

Page: 3 / 14

AH1 (FJ) Switches
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
AECTB15E 202203
Panasonic Corporation 2022
Right angle
Left angle
P/C board right angle terminal
Actuators
Operating Force
(OF) Max.
AgNi alloy contact type AgNi alloy + Au-clad contact type
Pin plunger
0.74 N AH1780 AH178061
1.47 N AH1760 AH176061
Hinge lever
0.25 N AH1782 AH178261
0.49 N AH1762 AH176261
Simulated roller lever
0.26 N AH1784 AH178461
0.54 N AH1764 AH176461
Note: 1. Color of plunger
AgNi alloy contact type: white
AgNi alloy + Au-clad contact type: dark red
2. Please order addition 9 at the end of the part number for UL/C-UL products with safety standards.
P/C board left angle terminal
Actuators
Operating Force
(OF) Max.
AgNi alloy contact type AgNi alloy + Au-clad contact type
Pin plunger
0.74 N AH1880 AH188061
1.47 N AH1860 AH186061
Hinge lever
0.25 N AH1882 AH188261
0.49 N AH1862 AH186261
Simulated roller lever
0.26 N AH1884 AH188461
0.54 N AH1864 AH186461
Notes: 1. Color of plunger
AgNi alloy contact type: white
AgNi alloy + Au-clad contact type: dark red
2. Please order addition 9 at the end of the part number for UL/C-UL products with safety standards.
3. Since the right angle and left angle are as shown in the photo below with the push plunger as the reference point, be careful not to make a mistake.
RATING
Contact rating
Standard rating Minimum applicable load
AgNi alloy contact type
(OF) 0.74 N type 1 A 125 V AC, 1 A 30 V DC —
(OF) 1.47 N type 3 A 125 V AC, 2 A 30 V DC —
AgNi alloy + Au-clad contact type 0.1 A 125 V AC, 0.1 A 30 V DC 5 mA 6 V DC, 2 mA 12 V DC, 1 mA 24 V DC
Note) OF: Value of pin plunger
Specifications
Item AgNi alloy contact type AgNi alloy + Au-clad contact type
Expected
life
Mechanical life (OT) Specified value
(OF) 0.74 N type: Min. 10
6
(at 60 cpm)
(OF) 1.47 N type: Min. 5 × 10
5
(at 60 cpm)
Electrical (OT) Max.
Min. 3 × 10
4
(at 20 cpm) (at rated load)
Min. 10
5
(at 20 cpm) (at rated load)
Insulation resistance Min. 100 MΩ (at 500 V DC)
Dielectric
strength
Between non-continuous terminals 600 Vrms for 1 min
Between each terminal and other
exposed metal parts
1,500 Vrms for 1 min
Between each terminal and ground 1,500 Vrms for 1 min
Contact resistance (Initial)
Max. 30 mΩ
(by voltage drop, 1 A 6 to 8 V DC)
Max. 100 mΩ
(by voltage drop, 0.1 A 6 to 8 V DC)
Vibration resistance (Pin pluger type) 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening: Max. 1 msec)
Shock resistance (Pin plunger type) Min. 294 m/s
2
(Contact opening: Max. 1 msec)
Allowable operating speed (No load) 1 to 500 mm/sec
Max. operating cycle rate (No load) 120 cpm
Ambient temperature –25 to +85°C (no freezing and condensing)
Unit weight Approx. 0.5 g
Protection grade IP40
Notes: 1. Test conditions and judgement are in accordance with NECA C 4505.
2. OF: Value of pin plunger type
ー 3 ー