Panasonic AGM1CSRX16T, Reference Manual

Page: 24 / 108

No. Name LED color Function
(3) RUN Green Indicates the operating state of the application.
RUN (Lit) and STOP (Unlit): The application is in the operating state.
RUN (Unlit) and STOP (Lit): The application is in the stopped state.
RUN (Unlit) and STOP (Unlit): No application exists.
(4) STOP Green
(5) ERROR Red
Indicates that an error has occurred in the system.
Flashing: An error occurred. (Flashing cycle: ON for 0.5 s and OFF
for 0.5 s)
Unlit: Normal
(6) SD Green
Indicates an access state to the SD memory card.
Lit: Currently accessing to the SD memory card
Unlit: No access to the SD memory card
(7) COM.SD Green Flashes while data is transmitted from the COM port.
(8) COM.RD Green Flashes while data is received by the COM port.
(9)
RTEX
STATUS
Green
Indicates the packet transmission / reception state through RTEX
communication.
Lit: RTEX communication is established with normal communication.
Flashing: RTEX being initialized.
Unlit: RTEX communication is not established.
(10)
RTEX
LINK
Green
Indicates the LINK state of RTEX communication.
Lit: Normal connection (The TX of the sending node and the RX of
the local node are electrically connected normally.)
Unlit: Not connected
(11)
CH0 A, B, and
Z
CH1 A, B, and
Z
Green
Indicates the status of the counter input signal
(Note 1)
(12) 0-F Green
Indicates the ON/OFF state of the Controller I/O depending on the
state of the display selector switch.
Display selector switch X
Lit: Each terminal of the input contacts X0-XF is ON.
Unlit: Each terminal of the input contacts X0-XF is OFF.
Display selector switch Y
Lit: Each terminal of the output contacts Y0-YF is ON.
Unlit: Each terminal of the output contacts Y0-YF is OFF.
(Note 1) The LEDs for the counter input signals flash according to the input statuses, thus look as if they are
continuously lit if the input frequencies are high.
3.1.2 Terminal Layout Diagram
■
High-speed counter input part
The 2-ch high-speed counter can be used.
3.1 Names and Functions of Components of the GM1 Controller
3-4 WUME-GM1H-01