Men
u
109
Item
Display
mode
Description of settings
32K AUDIO
TAPE
(VCR)
Sets the audio to output as CH1 and CH2 signals when playing back a tape
recorded in the 32K (12bit) audio mode.
ST1:
Selects the sound that was recorded during shooting.
CH1 signals = CH1 track
CH2 signals = CH2 track
ST2:
Selects the sound that was dubbed on the recording.
CH1 signals = CH3 track
CH2 signals = CH4 track
MIX:
Mixes the sound that was recorded in shooting and audio dubbing.
CH1 signals = CH1 track + CH3 track
CH2 signals = CH2 track + CH4 track
Note
When the sound is recorded in the 48K (16bit) audio mode, CH3 and CH4 do
not exist so the following is always the case.
CH1 signals = CH1 track
CH2 signals = CH2 track
AUDIO OUT (P2)
P2
(MCR/
VCR)
Sets the audio signals to output from the AUDIO IN/OUT pin jack when the P2
card or the tape is played back.
CH1 · CH2:
CH1 output = CH1 signals, CH2 output = CH2 signals
CH1:
CH1 output = CH1 signals, CH2 output = CH1 signals
CH2:
CH1 output = CH2 signals, CH2 output = CH2 signals
CH3 · CH4:
(P2 card only)
CH1 output = CH3 signals, CH2 output = CH4 signals
CH3:
(P2 card only)
CH1 output = CH3 signals, CH2 output = CH3 signals
CH4:
(P2 card only)
CH1 output = CH4 signals, CH2 output = CH4 signals
AUDIO OUT (TAPE)
TAPE
indicates the factory setting.
(continued on the next page)
PLAYBACK FUNCTIONS screen
