Panasonic AGDVC20P - 3 CCD DV CAMCORDER, Operating Instructions Manual

Page: 33 / 42

Others
33
Others
Indications
Various functions and the camera-recorder status are shown on
the screen.
Basic indications
: Remaining battery power
0h00m00s00f: Time code
3:30:45PM: Date/Time indication
Recording indications
R0:45: Remaining tape time
≥
Remaining tape time is indicated in minutes. (When it reaches
less than 3 minutes, the indication starts flashing.)
SP: Standard Play mode
(Recording speed mode)
-19-
LP: Long Play mode
(Recording speed mode)
-19-
¥
: Recording
-19-
;
(Green): Recording pause
-19-
Fade out (when the DV terminal is connected)
;
(Green flash): Standby mode
;
(Red): Fade out
: Recording check
-19-
: Cinema mode
-23-
: Digital zoom
-20-
: Automatic mode
-18-
: Manual mode
-23-, -24-, -25-
MF: Manual focus
-25-
5
k
: Zoom magnification indication
-20-
: Backlight mode
-21-
: Image stabilizer
-23-
1/500: Shutter speed
-25-
F2.4: F number
-25-
6dB: Gain value
-25-
: Soft skin mode
-22-
: Tele macro
-22-
: Fade (White)
-22-
: Fade (Black)
-22-
: Color night view function
-21-
: 0 Lux night view function
-21-
: Zoom microphone
-20-
: Microphone sensitivity level
-20-
: Wind noise reduction
-22-
5
: Sports mode (Scene mode)
-23-
: Portrait mode (Scene mode)
-23-
: Low light mode (Scene mode)
-23-
: Spotlight mode (Scene mode)
-23-
: Surf & snow mode (Scene mode)
-23-
: Auto white balance
-24-
: Indoor mode (recording under
incandescent lamp)
-24-
: Outdoor mode
-24-
: White balance adjustment mode
-24-
: Blank search
-19-
Playback indications
¥
: Recording underway
1
: Playback
-26-
;
: Pause
-26-
5
: Fast-forward/Cue playback
-26-
6
: Rewind/Review playback
-26-
D
/
E
: Slow motion playback
-26-
;1
/
2;
: Frame-by-frame playback
-26-
2
k5
: Variable-speed search
-27-
: Repeat playback
-26-
A.DUB
¥
: Audio dubbing
-30-
A.DUB
;
: Audio dubbing pause
-30-
: Blank search
-19-
12bit, 16bit: Audio recording mode
-32-
: Volume adjustment
-26-
Warning/alarm indications
If any one of the following indications lights up or flashes,
please check the camera-recorder.
Confirmatory indications
Y
: A cassette with the accidental erasure prevention slider
placed in the [SAVE] position is inserted.
No cassette is inserted.
[--]/
0
:
The built-in battery is low.
-15-
°
: The warning/alarm indication appears when you record
yourself. Turn the LCD monitor towards the viewfinder
and check the warning/alarm indication.
REMOTE:
An incorrect remote control mode has been selected.
-17-
2
END:
The tape came to the end during recording.
:
: The video heads are dirty.
-36-
Textual indications
3
DEW DETECT/
3
EJECT TAPE:
Condensation has occurred. Take out the cassette and
wait for a while. It takes some time until the cassette
holder opens, but this is not a malfunction.
-36-
LOW BATTERY:
The battery is low. Recharge it.
-10-
NO TAPE:
No tape is inserted.
-12-
TAPE END:
The tape came to the end during recording.
CHECK REC TAB:
You are attempting to record pictures on a tape with the
accidental erasure prevention slider placed in the [SAVE]
position.
You are attempting audio dubbing or digital dubbing on a
tape with the accidental erasure prevention slider placed
in the [SAVE] position.
CHECK REMOTE MODE:
An incorrect remote control mode has been selected. This
is only displayed at the first operation of the remote
control after powering-on.
-17-
WRONG TAPE FORMAT:
You are attempting to play back a tape section that has
been recorded with a different TV system. This cassette is
incompatible.
UNABLE TO A.DUB (LP RECORDED):
Audio dubbing cannot be performed because the original
recording was in LP mode.
UNABLE TO A.DUB:
You are attempting to perform audio dubbing on a
non-recorded tape.
COPY PROTECTED:
Images cannot be recorded correctly because the
medium is protected by a copy guard.
NEED HEAD CLEANING:
The video heads are dirty.
-36-
PUSH THE RESET SWITCH:
An irregularity in the equipment has been detected.Press
the reset button (
-8-
). This may solve the problem.
You connect a device except for the DV format to the DV
terminal. Pull out the DV cable, and press the reset button
(
-8-
).
CHANGE TO MANUAL MODE:
You are attempting to select the item on the [SCENE MODE]
when the [AUTO/MANUAL/FOCUS] switch is set to [AUTO].
REVERSE THE LCD MONITOR:
At the time of 0 Lux night view mode, when LCD monitor
is not reversed, it displays. When the LCD monitor is
rotated by 180° towards the lens, the brightness of the
LCD monitor cannot be adjusted.
CINEMA
AUTO
MNL
EIS
0Lux
ZOOM
AWB
DVC20_Eng.book 33 ページ ２００６年４月６日 木曜日 午前１０時１０分