Panasonic AG-UX90, Operating Instructions Manual

Page: 91 / 206

- 91 -
≥
Register “PRE-REC” to a USER button. ( l 79 )
This allows the recording of an image and audio to start before you press the recording start/stop
button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while
MOV/MP4 will be recorded from approximately 4 seconds before the operation.
≥
[P-] is displayed on the screen. After you start recording, the display changes to [P-REC].
≥ Aim the unit at the subject beforehand.
≥
There is no beep sound.
≥ This function is not available in the following cases:
j
In Variable Frame Rate Mode ( l 91 )
j During the Interval Recording ( l 162 )
≥
In the following cases, a 3 second image that precedes the recording of an AVCHD scene or a
4 second scene that precedes the recording of an MOV/MP4 scene may not be recorded:
j
Immediately after the maximum PRE-REC standby time has elapsed*
j If the length of time from when [PRE-REC] is set to [ON] to when you start recording is too short
j
If the length of time from when you display the recording screen by turning it off and on or pressing
the THUMBNAIL button to when you start recording is too short since you set PRE-REC
j
When the card slot selected for motion picture recording is switched automatically because you
started recording with normal settings or when [2 SLOTS FUNC.] is set to [RELAY REC] (
l 41 )
* The maximum PRE-REC standby time is 3 hours. Once PRE-REC is activated, it is automatically
deactivated and then re-activated every 3 hours.
≥
Images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.
This enables/disables Variable Frame Rate (VFR) Mode.
In Variable Frame Rate Mode, you can record quick or slow motion picture by changing the frame
rate before recording.
Slow motion (overcrank recording)
Used in scenes such as climaxes, a slow motion effect creates a dramatic impression. Set a frame
rate that provides more frames than the frame rate in [REC FORMAT] does.
Example: If you set [FHD 1080/25.00p 50M] to 50 fps and record a motion picture, a slow motion
effect of 1/2 can be gained.
Quick motion (undercrank recording)
A fast motion effect is used in scenes showing the flow of clouds, people standing in the middle of
crowds, etc. Set a frame rate that provides less frames than the frame rate in [REC FORMAT] does.
Example: If you set [FHD 1080/25.00p 50M] to 12 fps and record a motion picture, a quick motion
effect of 2
k can be gained.
≥
Register “Variable Frame Rate Mode” to a USER button. ( l 79 )
≥ Make the [REC MODE] and [REC FORMAT] settings. ( l 147 )
≥
Variable Frame Rate Mode is available for the following [REC MODE] and [REC FORMAT]
settings.
PRE-REC
Variable Frame Rate Mode
Recording mode Recording format
MOV, MP4 FHD 1080/25.00p 50M
AG-UX90EJ_DVQP1150ZA.book 91 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分