Panasonic AG-UX170 Operating Instructions Manual Download Page 88

Page: 88 / 236

- 88 -

≥

Register [SPOTLIGHT] to a USER button. (

)

Switches to automatic iris control for spotlight.
Very bright object is recorded clearly.

≥

appears when it is set.

≥

Canceling [SPOTLIGHT] resets the iris mode to the previous setting.

≥

This item cannot be set during Freeze Frame. (

)

≥

Register [BLACK FADE] to a USER button. (

)

Fade in/fade out effect (black) can be added to the video and audio that is being recorded.

Press USER button or touch USER button icon in the recording screen.

≥

Fade out will start, and fade in will start after completing the fade out.

≥

It will fade out when the button is pressed and held, and fade in will start when the button is
released.

≥

Recording will not start even if the fade out is started. It is possible to press the recording start/
stop button during the fade in or fade out.

≥

Black Fade is not possible in following cases:

During Super Slow Recording (

106

)

In Variable Frame Rate Mode (

103

)

During the Interval Recording (

186

)

During Freeze Frame (

)

≥

The thumbnails of scenes recorded using fade in become black.

≥

Register [WHITE FADE] to a USER button. (

)

Fade in/fade out effect (white) can be added to the video and audio that is being recorded.

Press USER button or touch USER button icon in the recording screen.

≥

Fade out will start, and fade in will start after completing the fade out.

≥

It will fade out when the button is pressed and held, and fade in will start when the button is
released.

≥

Recording will not start even if the fade out is started. It is possible to press the recording start/
stop button during the fade in or fade out.

≥

White Fade is not possible in following cases:

During Super Slow Recording (

106

)

In Variable Frame Rate Mode (

103

)

During the Interval Recording (

186

)

During Freeze Frame (

)

≥

The thumbnails of scenes recorded using fade in become white.

[SPOTLIGHT]

[BLACK FADE]

[WHITE FADE]

AG-UX180ED(DVQP1171ZA)_E.book 88 ページ２０１６年１１月２８日　月曜日　午前１１時３２分

Summary of Contents for AG-UX170













































































































































































































































Search results

Summary of Contents for AG-UX170

Reviews:

Related manuals for AG-UX170

Brands by name

Popular brands

Panasonic AG-UX170, Operating Instructions Manual

Search results

Summary of Contents for AG-UX170

Reviews:

Related manuals for AG-UX170

Brands by name

Popular brands