- 80 -
The built-in optical ND filter (light intensity adjustment filter) can be switched.
≥
Use this when recording in sunny outdoor when the subject is too bright and the screen becomes washed out.
1
Switch to multi manual icon [
ND FILTER] (yellow display: Function Selection Mode) by
pressing the
/
buttons in the recording screen.
2
Press the SET button.
≥
The multi manual icon will change to white. (Function Execution Mode)
3
Press the
/
buttons to switch the ND filter.
4
Press the SET button to complete the setup.
≥
If the selected setting [ND1/64], [ND1/16] or [ND1/4] does not match an ND filter setting recommended by this unit,
the recommended setting will be displayed on the screen, blink for approximately 5 seconds and disappear.
≥
A recommend ND filter setting may not be displayed correctly in scenes that are too dark.
≥
The brightness may change drastically when the ND filter is changed.
ND filter
ND1/64
ND FILTER
ND1/16
A
Recommended ND filter setting
B
ND filter setting
C
Multi manual icon [ND FILTER]
[ND1/64]:
Reduces the amount of light to 1/64.
[ND1/16]:
Reduces the amount of light to 1/16.
[ND1/4]:
Reduces the amount of light to 1/4.
[CLEAR]:
Does not use the ND filter.
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 80 ページ ２０１７年５月２２日 月曜日 午後２時１１分
