- 11 -
When disposing of or giving away the SD card, note
that:
≥
Formatting and deletion of this unit or computer only
changes the file management information and does
not completely delete the data in the SD card.
≥
It is recommended that the main SD card is either
physically destroyed or the SD card is physically
formatted using this unit when disposing of or giving
away the SD card.
≥
To physically format, connect this unit to the AC
adaptor, select [CARD FUNCTION]
#
[FORMAT CARD]
#
[SD CARD 1] or [SD CARD 2]
from the menu, and touch [YES]. Press and hold REC/
PAUSE button in the following screen for three
seconds. Screen to delete the SD card data is
displayed, so select [YES] and follow the instruction on
the screen.
≥
The customer is responsible for the management of
the data in the SD card.
≥
When the LCD monitor is dirty or condensation has
occurred, please wipe it using a soft cloth such as a
lens cloth.
≥
Do not touch the LCD monitor with your finger nails, or
rub or press with strong force.
≥
It may become hard to see or hard to recognize the
touch when the LCD protection sheet is affixed.
≥
When the unit has become very cold, for example due
to storage in a cold area, its LCD monitor will be
slightly darker than usual immediately after the unit is
turned on. The normal brightness will be restored
when the unit’s internal temperature rises.
It is possible to distribute the streaming image of the unit
(IP image transmission) or change the setup of the unit
(IP control) by operating the web browser screen of a PC
or mobile terminal connected to the unit via a network.
(
,
)
≥
The IP image refresh speed and operations from the
web screen/remote camera controller may become
slower depending on the following factors.
j
Network environment
j
Performance of your PC or mobile terminal
j
Subjects
j
Number of accesses to the unit
j
Writing speed of the SD card being used (when
recording to the SD card)
≥
Do not run the Easy IP Setup Software on a multiple
number of personal computers for a single camera and
set the IP address at the same time. Otherwise, you
will be unable to complete the proper procedure and
set the IP address correctly.
About the SD card (optional)
LCD monitor
Extremely high precision technology is employed to
produce the LCD Monitor screen. The result is more
than 99.99% effective dots with a mere 0.01% of the
dots inactive or always lit. However, this is not a
malfunction and does not affect the recorded picture.
About operation from the Web screen
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 11 ページ ２０１７年５月２２日 月曜日 午後２時１１分
