Panasonic AG-HPX255EN Operating Instructions Manual Download Page 79

Page: 79 / 170

Playback

Playing back clips

Turn the POWER/MODE switch to set to PB/

THUMBNAIL mode.

The thumbnail screen appears on the LCD
monitor.

Push the Operation lever in the ◄ ►

direction and position the pointer on the

clip you wish to play back.

Push the Operation lever in the ▲ direction

(► playback).

• The clip under the pointer will be played back

on the LCD monitor.

• When playback of the clip over which the

cursor is placed is finished, subsequent clips
that can be played back are played back in
the order they are displayed on the thumbnail
screen, and when playback of the final clip is
complete the system returns to the thumbnail
screen.

• When playing back clips, it is not

necessary to “select” the clips (blue

frames around the thumbnails).

• Clips with clip numbers displayed in

red cannot be played.

• You can perform actions such as fast forward,

rewind, and pause during operation by using the
Operation lever or remote control. See page 74 for
details.

• During clip playback, push the Operation lever

in the

▼

direction (STOP) to stop playback and

return to the thumbnail screen.

• When playback is stopped, the position

of the pointer moves to the clip that was

being played back, regardless of where the

playback started.

• Push the Operation lever in the

▲

direction

(► play back)

again to start playback from

the beginning of the clip under the pointer.

To continue playing from where previously

stopped, turn the PLAYBACK RESUME

setting “ON” in “Setting the thumbnail

display mode” on page 92.

Selecting thumbnails

Multiple thumbnails can be randomly selected in
the thumbnail screen.

Push the Operation lever in the ◄ ►

direction to the clip you wish to select, and

press SET.

The frame around the selected thumbnail
changes to a blue frame. Press the SET button
on the Operation lever again to deselect the
clip.

Additional clips can be selected by

repeating Step 1.

It is possible to display only the selected thumbnails
in the thumbnail screen for playback.
• “Switching the thumbnail display” (Page 80)

Operation lever

MENU button

LCD Monitor

Summary of Contents for AG-HPX255EN











































































































































































Search results

Summary of Contents for AG-HPX255EN

Reviews:

Related manuals for AG-HPX255EN

Brands by name

Popular brands

Panasonic AG-HPX255EN, Operating Instructions Manual

Search results

Summary of Contents for AG-HPX255EN

Reviews:

Related manuals for AG-HPX255EN

Brands by name

Popular brands