10
Item
Display
mode
Description of settings
MIC GAIN
(Camera)
Sets the input level of the external microphone connected to the INPUT
2 terminal. (Page 50)
-50dB, -60dB
5M REC CH SEL
(Camera)
Selects the recording audio channel for DVCPRO and DV formats.
(Page 50)
CH, CH
<Notes>
Even when 4CH is selected as this item’s setting, the signals will be
input to two channels (always CH1 and CH2) when there are two
1394 input channels.
Similarly, even when 4CH is selected, the 1394 output signals will be
delivered to two channels (always CH1 and CH2).
•
•
19 TC REGEN
(MCR)
Selects the time code used for recording the signal from equipment
connected to the 1394 terminal.
ON:
Records using the time code of the signal input through the 1394
terminal.
OFF:
Records using the time code set in TCG.
If you select ON here, this has priority over the settings in TCG.
If there is no input to the 1394 terminal, the camera follows the
settings in TCG.
•
•
TCG
(Camera)
(MCR)
Sets the mode in which you advance the time code.
FREE RUN:
The time code is advanced regardless of the operation mode.
When setting a frame rate other than 25P during operation with the
720P/25PN format, the FREE RUN operation for the time code will
not be performed, and the REC RUN operation will be performed
instead. It is the same when setting a frame rate other than 25P
during operation with the 720P/25PN format.
REC RUN:
The time code is advanced only when recording.
•
TC PRESET
(Camera)
(MCR)
Sets the initial time code.
19 UB REGEN
(MCR)
Selects the user information used when recording the signals from
equipment connected to the 1394 terminal.
ON:
Records using the user information of the signal input through the 1394
terminal.
OFF:
Records using the user information set in UB MODE.
If you select ON here, this has priority over the setting in UB MODE.
The user information is recorded only when the signal contains the
user information.
If there is no input to the 1394 terminal, the camera follows the UB
MODE settings.
•
•
•
Setup menu list (continued)
RECORDING SETUP screen (continued)
___indicates the factory setting.
