User Buttons and User File
The three User buttons on the
AG-HPG20 are set with the System
Format (User 1), Exit (User 2) and Alt
(User 3) functions by default. These
User buttons can also be assigned
other functions by the user. Up to
four User files containing button
settings can be stored in an SD/
SDHC card.
Assignable Functions
Functions that are assignable include input select, system format select, Rec
format SD, Rec format HD, Shot mark, Text memo, LCD backlight, OSD output
select, Audio output signal select, Card slot select, LCD reverse display, WFM/
VECTOR display, One clip playback
Waveform, Vector and 4:3 Marker
The AG-HPG20 has waveform and vectorscope display functions of the captured
video signal on the LCD monitor. With HD video, a 4:3 marker can be displayed
on the LCD monitor.
Play Back Variable Frame-Rate Sources
The AG-HPG20 supports the variable frame-rate recording widely used in
creative video production. Use AG-HPG20 (P2 Portable) for on-the-spot
previewing of slow-motion and other special effects recorded in 720pN (native)
mode with a P2 HD Camcorder.
*The AG-HPG20 itself is not capable of native mode recording. It performs pull-down
conversion for playback.
Small, Lightweight and Fully Mobile
The AG-HPG20 (P2 Portable) main unit
weighs just 1.1 kilograms (2.5 lbs) and is
small enough to use with one hand.
Thanks to its rugged construction, it's
tough enough to withstand rigorous field
use. A powerful 5400-mAh battery pack
mounts to the main unit's back. The
AG-HPG20 can also use the
AG-HVX200 series’s battery, or plug it
into an ordinary AC outlet using the
adaptor provided.
HD/SD SDI Input/Output Terminals for Line Recording
The AG-HPG20 comes with HD/SD
SDI input and output terminals as
standard equipment. This supports
high-quality line recording using
signals from a video camera or
switcher. When connected to a
Camcorder, the AG-HPG20 syncs
Rec Start/Stop with the camera
trigger.
Preview of External HDD Content
The new HDD Preview function on
the AG-HPG20 plays back P2 files
from an external hard-disk drive
connected via USB 2.0 (Host) for
on-screen visual checks. This adds
extra convenience to data backup
operations.
*HDD Preview uses a lower frame rate to
refresh the display.
USB 2.0 Host/Device Interfaces
The USB 2.0 interface includes both
host and device modes, for flexible
interfacing with an external hard-disk
drive and nonlinear editor.
• HOST mode lets you copy files
between a P2 card and a hard-disk
drive and make backup copies of
video clips. USB bus power (5 V, 0.5
A) is provided to power the external
drive. It is also possible to rename the drive.
• DEVICE mode lets you upload and download files, just as you would with a
P2 drive.
IEEE 1394 Interface
The IEEE 1394 interface can be used for a variety of purposes, such as streaming
output (DVCPRO HD, DVCPRO50, DVCPRO, DV) to a nonlinear editor, backup
recording for a Panasonic
camcorder, and copying data from
a DVCPRO HD VTR to a P2 card.
Analog Outputs
The AG-HPG20 has composite
video output and audio output
(CH1/CH2 pin jacks).
Nimble, Easy Operation and a Wealth of Interfaces for Active Field Recording
P2HD/DVCPRO HD/
DVCPRO 50/DVCPRO Camcorder*
Camcorder*/Switcher
IEEE 1394
HD/SD SDI
AG-HPG20
(P2 Portable)
*Linked or automatic operation is possible only
when supported by the connected Camcorder.
P2 Card
Composite
HD/SD SDI
USB 2.0
AG-HPG20
(P2 Portable)
Monitor
(LCD/PDPetc.)
HDD
•Line Recording:
The HD/SD SDI input terminal allows AVC-Intra
recording from a wide range of sources, including existing tape-based
Camcorders. Use the IEEE 1394 interface for connecting Panasonic
DVCPRO equipment.
*The IEEE 1394 input/ouput terminals do not support the AVC-Intra 100 or AVC-Intra 50 codec.
•Playback, Preview and Output:
The AG-HPG20 provides easy, convenient
video viewing. It can play video files stored on a P2 card or in an external
hard-disk drive. Because the AG-HPG20 offers high picture and sound
quality and includes a Repeat function, it can also be used for applications
such as exhibitions and showrooms.
Waveform
Vectorscope
4:3 Marker
