manualshive.com logo in svg

Panasonic AG HMC150 - AVCCAM Camcorder - 1080p, Operating Instructions Manual

Share
Download
Panasonic AG HMC150 - AVCCAM Camcorder - 1080p Operating Instructions Manual Download Page 13

13

Before use

 

 

What is AVCHD?

    AVCHD is a standard for the recording and playback of highly detailed, high-definition video.
    Video is compressed in the MPEG-4 AVC/H.264 formats, and audio is recorded in Dolby Digital.

Information regarding compatibility of SDHC Memory Cards and recorded video

SDHC Memory Cards

SDHC Memory Cards cannot be used with non-SDHC-compatible equipment.
Ensure that all equipment is SDHC-compatible when using card with other devices.
(Page 10)

●
●

Compatibility of recorded video

Recorded video cannot be used with non-AVCHD-compatible 
equipment. For details, please see your product’s operating 
instructions.
Recorded video cannot be played back on non-compatible 
(non-AVCHD-compatible) equipment.
Playback may not always be possible on all AVCHD-compatible 
equipment. Please use this product for playback in such 
instances.

●

●

●

Older, non-AVCHD-compatible 
DVD recorder or DVD player, etc.

Summary of Contents for AG HMC150 - AVCCAM Camcorder - 1080p

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands