- 85 -
≥
Register “Level Gauge” to a USER button. (
)
This function displays the horizontal/vertical tilt of the unit with the electronic level.
∫
To correct the tilt
≥
The horizontal tilt display
A
and vertical tilt display
B
appear yellow when there is a tilt, and
appear green when there is almost no tilt.
≥
The maximum tilt display angles are approximately 45
o
in horizontal direction and 10
o
in vertical
direction.
≥
The electronic level does not affect the actual recorded images.
≥
This function is not available in the following cases:
j
During Freeze Frame (
j
When color bars are displayed. (
≥
If [SELF SHOOT] (
) is set to [MIRROR], the electronic level will not be displayed when you
record yourself.
≥
Even when the tilt is in the corrected state, an error of approximately 1
o
may occur.
≥
In the following cases, the electronic level may not be displayed correctly:
j
When moving this unit
j
When pointing this unit up or down at an angle closer to perpendicular
≥
Register “Background” to a USER button. (
)
When [2 SLOTS FUNC.] is set to [BACKGROUND], you can start/stop background recording.
≥
When the recording destination of motion pictures is set to [SD CARD 1] in [MEDIA SELECT]
(
), [SD CARD 2] will be used for background recording.
The following instructions assume that the recording destination of motion pictures is set to [SD
CARD 1].
≥
Set [2 SLOTS FUNC.] to [BACKGROUND]. (
is displayed for SD CARD 2.
(To start background recording)
Press the applicable USER button or the applicable USER button icon.
≥
Background recording will start on the SD card in SD CARD 2. (
will be displayed in red.)
(To stop background recording)
While motion picture recording to [SD CARD 1] is stopped, press and hold the
applicable USER button or the USER button icon.
Level Gauge
(Horizontal direction)
(Vertical direction)
When correcting the leftward tilt
When correcting the downward tilt
Background
BACKGR
BACKGR
