- 72 -
You can set the initial time code.
1
Select the menu.
2
Touch the item to set and change with
/
.
≥
It will be set to 00h00m00s00f when the RESET/TC SET button is pressed.
≥
“h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.
3
Touch [EXIT] to complete the setting.
≥
This unit will adjust the time code in accordance with the frame rate of the [REC FORMAT]
(
) or [OUTPUT FORMAT] (
). Therefore, it may not be continuous from the previous
final time code when the recording format is changed.
≥
If the frame rate in [REC FORMAT] or [OUTPUT FORMAT] is set to 23.98p, set the number of
frames to [00] or a multiple of 4. If you enter a different value, time code will not be recorded
correctly.
Setting the User Information
Eight digit hexadecimal alphanumeric can be entered and displayed as a memo information such as
dates, control numbers, etc., into the User Information.
UB 00 00 00 00
≥
This is displayed only when [REC MODE] is set to [AVCHD]. (
)
You can set the User Information.
≥
Set [REC MODE] to [AVCHD]. (
)
1
Select the menu.
2
Touch the item to set and change with
/
.
≥
You can use numbers from 0 to 9 and letters from A to F.
≥
It will be set to 00 00 00 00 when the RESET/TC SET button is pressed.
3
Touch [EXIT] to complete the setting.
[TC PRESET]
: [RECORD SETUP]
#
[TC PRESET]
[UB PRESET]
: [RECORD SETUP]
#
[UB PRESET]
MENU
MENU
