– 111 –
Chapter 5 Shooting — Shooting
Shooting
For shooting, use the following steps.
2
1
3
1 REC button (on the handle)
2 REC button (on the grip)
3 <AUTO/MANUAL> switch
1
Set the video settings and the audio input.
f
Before shooting, the followings must be set or adjusted.
- Image settings for the brightness function (iris, gain, shutter) and the white balance adjustment function, etc.
- Audio input settings for audio recording.
- Adjusting audio recording level
2
Select shooting mode with the <AUTO/MANUAL> switch.
<AUTO>:
auto mode
f
[A] is displayed at the upper part of the viewfinder and LCD monitor.
f
Focus, iris, gain, shutter, and white balance are automatically adjusted.
f
You can set the operations specified for the auto mode in the [CAMERA] menu
→
[AUTO SW].
<MANUAL>:
manual mode
f
To adjust focus, iris, gain, shutter speed, and white balance manually, set the camera to manual mode.
f
To adjust the brightness, adjust the iris and ND filter. (page 113)
f
To focus manually, use the focus operation. (page 113)
f
To adjust the white balance, adjust the white balance and black balance. (page 115)
f
To adjust the setting of the audio input and the recording level, switch audio input. (page 124)
3
Start the recording by pressing the REC button.
f
One REC button is located on both the handle and the grip.
f
The tally lamp is illuminated in red while recording.
4
Press the REC button again to stop.
5
Check videos recorded.
After recording ends, pressing the <REC CHECK> button automatically plays back approximately the last three seconds of the last recorded clip.
In this way, you can check whether video has been recorded properly.
f
Returns to recording standby after checking.
Selecting the resolution, codec, and frame rate for recording video
The resolution, codec, and frame rate of the recording video can be selected.
f
[SYSTEM] menu
→
[FREQUENCY]: System frequency
f
[SYSTEM] menu
→
[FILE FORMAT]: File format for recording
f
[SYSTEM] menu
→
[ASPECT]: Aspect ratio of the video to record in the signal format of the SD resolution (480i and 576i)
f
[SYSTEM] menu
→
[SUPER SLOW]: Super slow recording settings
f
[SYSTEM] menu
→
[SHOOTING MODE]: Shooting mode settings according to the shooting environment
f
[REC FORMAT]: Sets the signal format and codec mode for recording.
f
[SCENE FILE] menu
→
[VFR]: Variable frame rate recording function (variable frame rate range)
Summary of Contents for AG-CX350E
