Panasonic AG-AC30PB Operating Instructions Manual Download Page 13

Page: 13 / 154

- 13 -

∫

Adjust the length of the grip belt so that it fits your hand.

Adjust the grip belt according to the size of your hand.

≥

If you find it difficult to fasten the buckle

, move the pad

towards you, and fasten the buckle

again.

∫

Attaching the eye cup

Attach by aligning the notch of the eye cup attachment part with the protrusion at the inside of the
eye cup.

≥

The illustration below is an example of attaching the eye cup to use it with your right eye. If you
rotate the eye cup to the left by 180° before attaching it, you can use it with your left eye.

∫

Attaching the Shoulder strap

We recommend that you attach the shoulder strap (commercially-available) before going out of
doors to record so as to avoid dropping this unit.









Open the buckle.

Pull the end of the belt.

Notch

Protrusion





20 mm (0.8

) or longer



R68S3_PJPB.book 13 ページ２０１６年５月１８日　水曜日　午後１０時３２分

Summary of Contents for AG-AC30PB



























































































































































Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands

Panasonic AG-AC30PB, Operating Instructions Manual

Search results

Summary of Contents for AG-AC30PB

Reviews:

Related manuals for AG-AC30PB

Brands by name

Popular brands