Panasonic AG-AC30 Operating Instructions Manual Download

Page: 68 / 161

- 68 -

≥

Register “Backlight Compensation” to a USER button. (

Switches to automatic iris control to compensate the backlight.
This makes the image brighter to prevent darkening of a backlit subject. (

)

≥

Register “Black Fade” to a USER button. (

)

Fade in/fade out effect (black) can be added to the video and audio that is being recorded.

Press USER button or touch USER button icon in the recording screen.

≥

Fade out will start, and fade in will start after completing the fade out.

≥

It will fade out when the button is pressed and held, and fade in will start when the button is
released.

≥

Recording will not start even if the fade out is started. It is possible to press the recording start/
stop button during the fade in or fade out.

≥

Black Fade is not possible in following cases:

During Super Slow Recording (

)

During the Interval Recording (

125

)

During Freeze Frame (

)

≥

The thumbnails of scenes recorded using fade in become black.

≥

Register “White Fade” to a USER button. (

)

Fade in/fade out effect (white) can be added to the video and audio that is being recorded.

Press USER button or touch USER button icon in the recording screen.

≥

Fade out will start, and fade in will start after completing the fade out.

≥

It will fade out when the button is pressed and held, and fade in will start when the button is
released.

≥

Recording will not start even if the fade out is started. It is possible to press the recording start/
stop button during the fade in or fade out.

≥

White Fade is not possible in following cases:

During Super Slow Recording (

)

During the Interval Recording (

125

)

During Freeze Frame (

)

≥

The thumbnails of scenes recorded using fade in become white.

≥

Register “Slot Selection” to a USER button. (

)

You can change the card slot used for motion picture recording or the playback media.

≥

You can change the setting in the following situations:

While recording is paused in Recording Mode

While a thumbnail screen is displayed in Playback Mode (

)

While the list by date is selected (

)

Backlight Compensation

Black Fade

White Fade

Slot Selection

R68S3_PJPB.book 68 ページ２０１６年９月２日　金曜日　午前１０時４３分

Summary of Contents for AG-AC30


































































































































































Search results

Summary of Contents for AG-AC30

Reviews:

Related manuals for AG-AC30

Brands by name

Popular brands

Panasonic AG-AC30, Operating Instructions Manual

Search results

Summary of Contents for AG-AC30

Reviews:

Related manuals for AG-AC30

Brands by name

Popular brands