Panasonic AG-AC160A Series Operating Instructions Manual Download

Page: 83 / 110

Menu

Displays

Setup menu list

[SCENE FILE] screen

Item

Display

mode

Description of settings

[LOAD/SAVE/

INIT]

<CAMERA> [LOAD]:

Loads the scene file settings saved in this camera.

[SAVE]:

Saves the updated scene file settings.

[INIT]:

Returns the scene file settings selected using the <SCENE FILE>

dial, to the factory settings.

[NO]:

Returns to the previous screen.

[VFR MODE]

<CAMERA>

(AVCHD

mode only)

[ON]:

Enables the VFR (Variable Frame Rate) mode.

[OFF]:

Disables the VFR mode.

Operates only when [REC FORMAT] is [PH 1080/24P], [PH 1080/30P], or [PH

1080/25P].

When [SDI 24PsF] = [ON], VFR operation is disabled.

When [VFR MODE] = [ON], you cannot record audio.

When VFR mode is set to [ON], INTERVAL REC, relay recording, and SIMUL

REC settings will all be cancelled. This mode cannot be used with INTERVAL

REC, relay recording, SIMUL REC, and pre-rec functions.

[FRAME RATE] <CAMERA>

(AVCHD

mode only)

Sets [FRAME RATE].

Operates when [VFR MODE] is [ON].

You can set using <SHTR/F.RATE> on the left side of the camera body.

When [SYSTEM FREQ] = [59.94Hz]

When [REC FORMAT] = [PH 1080/24P] [PH 1080/30P]:

[2]/[6]/[9]/[12]/[15]/[18]/[20]/[21]/[22]/[24]/[25]/[26]/[27]/[28]/[30]/[32]/[34]/[36]/

[40]/[44]/[48]/[54]/[60]

When [SYSTEM FREQ] = [50Hz]

When [REC FORMAT] = [PH 1080/25P]

[2]/[6]/[9]/[12]/[15]/[18]/[20]/[21]/[22]/[23]/[24]/[25]/[26]/[27]/[28]/[30]/[32]/[34]/

[37]/[42]/[45]/[48]/[50]

[SYNC SCAN

TYPE]

<CAMERA>

Selects the synchro scan display setting.

[deg.]:

Sets to angle display.

[sec]:

Sets to speed display.

[SYNCHRO

SCAN]

<CAMERA>

Adjusts the synchro scan shutter speed used for shooting images on a TV

screen, etc.

Holding the OPERATION lever tilted upward or downward will cause the values

to change at a faster rate.

When

[SYSTEM FREQ] = [59.94Hz]

•

When [SYNC SCAN TYPE] = [sec]

60i/60 P mode: [1/60.0] - [1/249.8] secs

30 P mode: [1/30.0] - [1/48.0] - [1/249.8] secs

24 P mode: [1/24.0] - [1/48.0] - [1/249.8] secs

•

When [SYNC SCAN TYPE] = [deg.]

[3.0 d] - [180.0 d] - [360.0 d] (0.5 d increments, angle display)

When

[SYSTEM FREQ] = [50Hz]

•

When [SYNC SCAN TYPE] = [sec]

50i/50 P mode: [1/50.0] - [1/250.0] secs

25 P mode: [1/25.0] - [1/50.0] - [1/250.0] secs

•

When [SYNC SCAN TYPE] = [deg.]

[3.0 d] - [180.0 d] - [360.0 d] (0.5 d increments, angle display)

is the factory default mode for the <SCENE FILE> dial <F1>.

Menu

Summary of Contents for AG-AC160A Series















































































































Search results

Summary of Contents for AG-AC160A Series

Reviews:

Related manuals for AG-AC160A Series

Brands by name

Popular brands

Panasonic AG-AC160A Series, Operating Instructions Manual

Search results

Summary of Contents for AG-AC160A Series

Reviews:

Related manuals for AG-AC160A Series

Brands by name

Popular brands