h
igh
-s
ensitivity
, l
ow
-n
oise
u.l.t. i
mage
s
ensors
anD
h
igh
-Q
uality
DsP c
ircuit
High-Sensitivity, High-Quality, Dual 3MOS
U.L.T. Image Sensors
Two pairs of 2.2-megapixel 1/3-type 3MOS sensors are mounted left
and right. Each one employs full-pixel HD resolution to produce
precisely synchronized FULL-HD 3D images. Ultra Luminance
Technology (U.L.T.) enables these image sensors to attain high-
sensitivity, high-quality images.
20 bit DSP
The AG-3DP1 incorporates a
high-performance 20 bit Digital
Signal Processor that handles
image rendering processes
such as gamma and various
detail enhancement functions
with exceptional precision.
6-Mode Gamma for Richer Gradation
Drawing on technologies developed for the VariCam, Panasonic has
equipped the AG-3DP1 with advanced gamma functions that
address six different shooting scenarios, including two Cine-Like
Gammas.
AG-3DP1 Gamma Modes
HD NORM:
Suitable for standard HD recording
LOW:
Gently rising gamma curve to low brightness areas for a
balanced look
HIGH:
Expands the tone of dark parts and makes a brighter image.
The contrast softens.
B.PRESS:
Makes the contrast sharper than LOW
CINE-LIKE D: The Cine-Like mode shifted to prioritize dynamic range
CINE-LIKE V: The Cine-Like mode shifted to prioritize contrast
Focus Assist Functions
Press the Focus Assist button
and the center section of the
screen expands in size, making
it easier to determine if the
focus is correct. Also, the Focus
Bar that visually indicates the
focus level can be displayed on
the screen.
*The photo is simulated.
3-Position Gain Selector
There is a 3-position gain selector, with L, M and H settings. To each
setting you can assign a gain value from 0, +3, +6, +9 and +12 dB.
User Buttons
Three user buttons can each be allocated with one of the following
functions for one-touch operation: PUSH AF, Y-GET, SHOT MARK,
REC CHECK, R.CONV, 3D A.Z WFM, 3D A.ALERT, or 3D A.CONV.
Simplified Waveform and Vectorscope Display
The AG-3DP1 has Waveform and Vectorscope Display functions for
the captured video signal on the LCD monitor.
Scene File/User File
You can set the Scene File for setting of shooting conditions. Six
files are provided, and you can change any of the six file names and
their settings as desired. One set can be stored internally in the
AG-3DP1, and four sets on an SD Memory Card. One User file with
camera setting values can also be stored internally, and four files on
an SD Memory Card.
Other Camera Functions
• 4-position (off, 1/4 ND, 1/16 ND, 1/64 ND) optical neutral density
filter wheel.
• Slow, Synchro and High Speed Shutter.
• Matrix setting including a Cine-Like mode.
• Adjustable V detail level, detail coring.
• Chroma level, chroma phase, color temp and master pedestal.
• Knee point settings: Low, Mid and High.
• Three values (A/B/Preset) of white balance selector.
• Mode check: Displays a list of the camera settings.
• Zebra: Select any two levels from among 50% to 109%,
in 1% step.
• Y-GET: Measures brightness at the screen center and displays
precise numerical data.
s
hooting
a
ssist
f
unctions
i
nstantly
r
esPonD
to
s
hooting
s
ituations
Image with HD NORM mode
Image with CINE-LIKE GAMMA
DSP Processor
Waveform
Vectorscope
U.L.T. image sensor
Focus Assist ON
Focus Bar
4