Panasonic AFPXHEAD4, User Manual

Page: 34 / 76

3.3 Stored Data of the Output Contact (WY)
3.3.1 Analog Output Values
When a digital value is written, the value is converted to a corresponding analog output and is
output.
■
Applicable model
Model Channel
AFPXHEDA4 CH0 to CH3
AFPXHEA21 CH0
■
Digital conversion values
Digital conversion values for each output range are as follows.
Output range Digital conversion values
For -10 to +10 V, -5 to +5 V K-32000 to K+32000
For 0 to +10 V, 0 to +5 V K0 to K+32000
For +1 to +5 V K0 to K+25600
For 0 to +20 mA K0 to K+32000
For +4 to +20 mA K0 to K+25600
■
I/O allocation
Channel Expansion location
1st unit 2nd unit 3rd unit 4th unit 5th unit 6th unit 7th unit 8th unit
CH0 WY30 WY40 WY50 WY60 WY70 WY80 WY90 WY100
CH1 WY31 WY41 WY51 WY61 WY71 WY81 WY91 WY101
CH2 WY32 WY42 WY52 WY62 WY72 WY82 WY92 WY102
CH3 WY33 WY43 WY53 WY63 WY73 WY83 WY93 WY103
When the RUN mode is changed to the PROG. mode, the analog output will be as follows.
● When +1 to +5 V is selected: 1 V
● When +4 to +20 mA is selected: 4 mA
● Other than the above: 0 V or 0 mA
3.3.2 Input Range Setting Area
When an input range setting is entered, the analog input range is set.
3.3 Stored Data of the Output Contact (WY)
3-8 WUME-FPXHAIO-01