9
PRIMUSBUSINESS.CA
PRIMUS BUSINESS SERVICES
|
HOSTED PBX
|
PANASONIC A406 REPEATER QUICK SETUP
GUIDE
5.
Turn off the handset by pressing the “power” key, and then turn it back on
by pressing the “power” key. The handset will now be in site survey mode,
and display signal strength (RSSI) and connection status. Description of the
values are as follows (PS refers to the handset):
6.
Walk around to confirm the service area. If the readings are acceptable, the
display will remain green. If the display turns red and the signal is weak,
install the repeater in the area right before it starts turning red.
7.
Once the site survey is complete, revert the handset back to normal
operation. First, turn off the handset.
8.
Go into Maintenance Mode by following steps 1 to 3.
9.
Select “Base Monitor” and press “OK”.
10.
Select “OFF” and press “OK”.